Savageman25

All sold. Thanks

All sold. Thanks everyone.

The ammo and 77 pieces of once fired 223 brass for $70. I'll throw in 1lb of unopened benchmark powder for an extra 10 dollars if you want it.

I'll give some more info on scope when I have a bit more time shooting it.

Bottom two done by my friend after gun got zeroed with hand loads.

Preliminary results are very good. I wasn't looking for a group but it showed me what it's capable of. Went out to zero scope. Used hornady Amax 120 to start tuning adjustable block. So that is the mess in the middle. Then put in my hand loads and let my friend (who is a novice shooter) shoot top left target while trying to re zero for hand loads. I then got behind it and shot the top right target. First shot went to high right. Adjusted windage and then shot the top left hole. Adjusted elevation 3 clicks down (to much but I'm learning mils for the first time) then I shot that very tight 5 shot group. That 6th shot is the one just right and low of the very tight group. After that I clicked elevation up 2 and shot the final 2 in the mag. Those ones right at middle are the last two shots. the bottom two targets were then shot by my friend again. Ran out of time or else I woulda got back up and seen what I could do after being completely zeroed for all 10 shots.

My Grendel build is going to be mega upper and lower diamonhead VRS T rail jp lower parts kit minus trigger Slr adjustable gas block blackhole weaponry 18 6.5 Grendel barrel, honeycomb fluting jp low mass bolt carrier pws buffer tube ctr stock jp silent capture recoil spring ar gold trigger aadmount bushnell tactical hunter lrhs 3-12

Dies and bushings are sold. Ammo still for sale. No reasonable offer will be refused.

Scope looks great so far but I'll give better update after I shoot.

Thanks. It's 13.8"

I'll get some better pics up later. Only thing I might add is a accushot monopod.

Here it is put together. Gathering some reloading components. Probably won't get out to shoot it for a couple weeks. Complete build list Mega Maten Ambi set JP 6.5 Creedmoor 22" barrel JP Benney Cooley Brake SLR sentry 9 adjustable gas block Rousch gas tube Troy TRX extreme rail JP Low mass bolt carrier group and enhanced bolt JP silent captured recoil spring Tac-ops Sniper charging handle a2 buffer tube Magpul PRS stock Battle arms Ambi safety selector (standard and thin) JP (Hogue) grip AR gold trigger (308 version) Atlas psr bipod Aadland 34mm AR mount Bushnell DMR 3.5-21 G2 reticle

This is the last of the stuff to sell. Building a mega maten in 6.5 creedmoor is expensive so some stuff had to go.

Bought all this stuff but sold the gun so no need for it now.Brand new never used 223 competition neck sizing die set. This set was $235 when I bought it. I also have new size 245 and 246 titanium nitride neck sizing bushings that can be sold with the set. Each one costs 25 dollars new.Will sell them all together for 240. I'll also throw in 77 pieces of once fired brass deprimed and wet tumbled.Will sell die set alone for 220 obo Will sell each bushing individually for 20 each oboI have 5 boxes of hornady vmax 55gr 223 ammo. Another 29 rounds of 55 gr vmax ammo that was manufactured with new brass I bought at a gun show from an ammo manufacturer. I have shot some of it and it shoots just like the hornady manufactured ammo.Asking 100 for all ammo. OboBuy everything for 300 shipped. That's my bottom dollar. At that price point I'm losing over 100 dollars. Would consider trade for magpul ctr, pws buffer tube, jp lm carrier ar15, jp silent captured recoil ar15, ar gold trigger ar15, 6.5 Grendel barrel, Gg&g xds2 with QD, tac ops CH, 6.5 Grendel/creedmoor reloading supplies.

Sold. Thanks fellas

Second handle spf.

One sold one left.

Only other thing I have to get rid of is KNS anti rotation pins if you are interested in them. They are new.

Yes I'll take PayPal.

Two slightly used mega arms charging handles from maten uppers. I'm sure they will work with other 308 uppers. I haven't a clue what they go for. Let's get crazy and say $31.34 obo or $56.18 obo for both.

Bought all this stuff but sold the gun so no need for it now. Brand new never used 223 competition neck sizing die set. This set was $235 when I bought it. I also have new size 245 and 246 titanium nitride neck sizing bushings that can be sold with the set. Each one costs 25 dollars new. Will sell them all together for 240. I'll also throw in 77 pieces of once fired brass deprimed and soon to be wet tumbled. Will sell die set alone for 220 obo Will sell each bushing individually for 20 each obo I have 5 boxes of hornady vmax 55gr 223 ammo. Another 29 rounds of 55 gr vmax ammo that was manufactured with new brass I bought at a gun show from an ammo manufacturer. I have shot some of it and it shoots just like the hornady manufactured ammo. Asking 100 for it all. Obo Buy everything for 325 shipped

Thanks for the info. To be in all honesty it doesn't hurt my feelings to much to not buy from larue. I stumbled across a few of Mr. Larues' posts on other forums and his lack of professionalism has kinda put me off. So I think I'll be taking my money elsewhere.

So you think I should go ahead and get it? Don't worry, if it doesn't fit I'm not going to have a vendetta against you or anything. Just sleep with one eye open

Well the only reason I ask is because they are 50% off right now. I am just trying to save money in case in the future I am going to want it. I don't have the buffer and ctr right now to try. I guess for the price they are selling them I'm sure I could get my money back if it's to high.

You are correct. That is it