jeremyvyoral

Thanks got one on order.

Finally had time to pull out and measure buffer and spring. Everything looks good

I'll send some pics as soon as I'm able. Thanks again for the help.

The spent she'll is ejected, sometimes the bolt goes back into battery, sometimes it hangs on the second round. If the BCG goes into battery, I noticed that it creases the next round in the magazine.

I loaded one round in the magazine, it does lock back after the round is fired. So, after I lubed it up, I tried two rounds. It still fails to feed the second round, it hangs up on the second.

Thanks. I had no idea it needed to be that wet.

Should I dunk the whole bcg in oil? Or just the carrier?

Then mine definitely seems short.

Sorry, should be Thundertactical.com.

Pmag.

I had no idea it needed to be lubed up that much. The rifle has : The Upper Receiver parts included are below: 15' Keymod Rail Upper Receiver , DPMS style . Forged from 7075 T6 aluminum. This Upper is bead blasted and anodized Black. 20" .308 Barrel Rifle Gas System Phosphate Coated 1/10 Twist Chromoly The Lower Receiver parts included are below 80% Lower Receiver , DPMS style . Forged from 7075 T6 aluminum. Magwell is broached for a perfect fit and are machined to spec so that all accessories will fit. This Lower is bead blasted and anodized Black. The operations left to be completed on the 80% Lowers .308 Lower Receivers are as follows: Complete AR Butt Stock Assembly w/ Buffer, Tube, spring, butt plate and castle nut

Thanks for the info

Thanks, glad to be here.

Thanks, glad to hear from ya.