R4CETECH92
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Gallery
Store
Everything posted by R4CETECH92
-
7mm in the house I'll be deaf let alone the holes...
-
Well no range today 5in of snow in Kentucky all hell breaks loose it was closed due to weather, outdoor range.
-
Too bad it's a matte finish otherwise I would belive that too be factual!?
-
Well ordered from vt supply last week, tubbs spring came in today and it feels smoother already hopefully range tomorrow
-
I'll cancel it if you can find one, I found a spikes flat wire bit no tubbs. Larue didn't have an eta either.
-
Still waiting on my tubbs spring from Larue calling them today hopefully not on back order to much longer...
-
I ordered my spring from larue a
-
Ahh the super bit I like it
-
.233" definately not much drilling depth required.
-
That's a solid response lol...hopefully it is as accurate as it is soft...lol
-
Perfect thanks, will get them there. I have a basic set nothing numbered.
-
Start with a 5/64 drill bit then go to numbered bits, or do I buy a set of # bits (49) and go down from there?
-
Sounds good I have a drill press at the shop I'll use, new spring is ordered as well. When it comes to the drilling I grabbed a dowel rod from Lowes tonight and will do it on a press if the spring doesn't work.
-
Wash, I measured my buffer tube it was 7" even and I'll double measure gas port in the morning thanks again. The drilling is still making me nervous...
-
I planned on it so I don't over drill.
-
Thanks for the advise! And the bcg is lubed!
-
Ordered! Will shoot it when it comes in then find some good numbered drill bits.
-
Thanks, by the looks I will definitely need to drill, or find someone who can local.
-
Thanks for the help guys I appreciate it. Those springs are on back order, I'll order one regardless. Then if that doesn't fix it time to drill.
-
Collapsible, I'll measure that as well thanks.
-
It's carbine buffer tube will measure tomorrow. Buffer is 2.5" long, spring was just under 11", and spring was 28 coils.
-
Well it all started with a Juggernaut tactical upper and lower, started piecing her together with CMMG internals, 20" X-Caliber barrel chambered in 7mm-08 with a 1:9 twist magpul stock and grip, 15" free float hand gaurd, Athlon opticts. Now to get it cycling right it will be all set and I'll be a happy person.
-
Hello from Kentucky. I've owned a few AR's in the past but now I can finally say I built my own. I have definitely had a learning curve with this being my first build, but after I get this cycling issue down sights are set on 1000 yards with that said ears are always open for advice. Thanks everyone!
-
Sounds like what I've been hearing. I will measure it accurately tomorrow at work, I checked with a set of bits tonight. It was between a .0625" (1/16) which fit and a .078" (5/64) which did not fit.
-
Will do I appreciate the help in advance!
