Dabaer

I should be able to do some live fire this week hopefully. I’ll let you guys know how it goes.

Here you go, I know that these guns had recalls for there extractors not ejecting and were replaced with the newer style (the one you see).

The issue occurs when I attempt to chamber a new round by bolt release and charging handle cycle. I can still do all that but it won’t be the problem

For sure, the gun is being feed by magpul or imi mags, everything except for the stock(a2 dpms kit), gas block (superlative arms .875) and the magpul grip and trigger guard are made by bcl (or at least attached to there rifles)

I think the picture may have been misleading. It looks fine to me but I might be wrong

What I think the problem is the barrel extension, I spent a few hours looking at it yesterday with various projectiles (different shapes obviously) and what I have noticed is the rounds that are jamming don’t get picked up on the feed lips and instead hit the barrel opening. As seen in the picture. For the rounds that do load they are gouged pretty good, if it helps I can post the pictures of each round too.

Near toronto, Ontario

Well, not often. Today, its a ar problem however.

Single loading is fine. It does lock back and loads smk projectiles fine. The failure occurs when I load any projectile with a more aggressive taper. Bolt release, charging handle, or mixing the rounds in a mag also leads to the same issue

Perfect, thank you for the help. I have never had other problems expect for specific rounds not feeding. Let me know if there is anything else info wise I can provide.

Bcl 102 (Canadian made) 18.5 in barrel 1:10 twist (holds about 1-2 moa depending on ammo and me) adjustable gas block, a2 stock (aftermarket) everything else is stock. feeds federal smk and hand load smk. Let me know what else you need spec wise!

Bcl 102 (Canadian made) 18.5 in barrel 1:10 twist (holds about 1-2 moa depending on ammo and me) adjustable gas block, a2 stock (aftermarket) everything else is stock. feeds federal smk and hand load smk. Let me know what else you need spec wise!

Hey, I’m from up North and need some help! I have an ar10 platform 308 and have a failure to feed problem. Using a sharper profile bullet like the Berger or Sierra game changer. The round jams itself between the bolt and barrel entrance. Anyone able to help with this issue? these are hand loads at saami spec. My 168 smk feed perfectly fine.

Hey guys, joined the group because I have an issue that I need community help with!