KRobinson

Below is the response I received from PSA when I inquired about the fit of the Presma handguards I ordered. Essentially, they state the PA-10 is DPMS low, but they won't guarantee the fit of any parts other than their own. I'll find out if they fit once they arrive tomorrow either way. "While the PA-10 platform is loosely based on the DPMS gen1 low profile, we can only guarantee the fit and function of PA-10 parts to other PA-10 parts and we do not recommend mixing AR-10 manufacturers. If you have any additional questions or concerns, please contact us".

Thanks for the information. I know a 308 can be a bit much for home defense and it would likely be my last go to out of my choices in the house. Mainly, I wanted another AR platform in a caliber other than .223. Just the same, I intend to outfit this one so that it can easily be used for longer shots at the range as well as at home if the need arose. Fortunately, I do live in the country so there are no neighbors to fret over. I'll stick with the gas tube that came with the rifle and it sounds like any fixed low profile .750 gas block should work fine for my purposes. I'll check out the threads on gas port diameters and recoil systems as well; thanks again.

I have a PSA PA10 G3 that came with the old style M16A2 style handguards and front sight both of which I am replacing. From what I have been reading, the PA10 requires handguards that are "DPMS low." I found a set of handguards made by Presma that are 15" entitled "AR10 LR 308 Super Light M-LOK Series Free Float Handguards, DPMS Low Profile" (https://team15tactical.com/products/presma-ar-10-lr-308-super-light-m-lok-series-free-float-handguards-15-in-dpms-low-profile) that I think should work for my purposes. My main question pertains to what else I will need to purchase and install. The handguards come with a new barrel nut, but nothing else regarding installation parts. I am assuming I will not need to replace the gas tube, but I am not entirely sure what gas block I should use. There are several low profile gas blocks on the market in .750 including some that are fixed and others that are adjustable. PSA does not provide the specifications for their barrel, but all that I have read indicate a .750 barrel for the PA10. I would appreciate any information regarding whether or not the gas tube needs to or should be replaced as well as information concerning the appropriate gas block. Lastly, are there any advantages to having an adjustable gas block versus a fixed one? Below are a couple of links to .750 gas blocks that are sold by PSA with the first link being the gas block that comes standard with PA10's that come with their free float handguards. I primarily bought this rifle for home defense and occasional time on the range. Thanks! https://palmettostatearmory.com/psa-custom-750-diameter-click-adjustable-gas-block-7811021.html https://palmettostatearmory.com/psa-custom-750-diameter-adjustable-gas-block-116001.html# https://palmettostatearmory.com/cmmg-low-profile-750-gas-block-assembly-55da38d.html