fmsniper

DPMS lower Aero precision upper JP Match 22 inch barrel .5 MOA at 970 yards

so far .5 moa group with factory 168 grain

complete DPMS Stainless barrel, 21.75 inch Upper 308. barrel was 24 inch bull, cut to 21.75 inch, slightly re contoured, with lightening cuts, 11 degree target crown, midwest industry key mod for-end. barrel and bolt only had 40 rounds fired before cutting it barrel is duracaot FDE steel low pro gas block $750.00 plus shipping or trade for tactical scope only missing the forward assist, never installed never seen a reason for it

SOLD

barrel is from Mcgowen barrels not sure who makes the free float tube I bought it a few years back

Sorry

DPMS LR upper with Stainless 7mm08 barrel, 17 inches long and free float rail 1/10 twist 250-300 rounds fired not included----is the following==bolt/carrier, scope and rings, forgrip Youu can use any 308 DPMS bolt $600 open to offers Paint is krylon, you can remove it I have 2 of these, now moving and need to get rid of a few

made from a commercial Mauser interarms, receiver, with hinged trigger gaurd. trigger is timeny side safety set to 3 pounds, receiver is trued, lugs lapped, extractor is jeweled. barrel is a Shilen, Stock is Devcon steel bed, barrel is free floated, all metal is parkerized, 10 shots fired for break in. scope not included, a great hunting rifle, light wieght for trade, what do you have? your FFL must except from and individual

barreled action and all metal minus stock $650.00 Pac-nor super match 26 inch 7mm Rem Mag barrel, 11 degree crown. Mounted on a Commercial FN Mauser action. Work done Lugs lapped Receiver trued, 10 MOA Scope Base glass bed, P&H Side Safety trigger, I have dope out to 1000 Yards buyer, Rifle shoots Berger 168’s fed from the magazine into .25 groups, very accurate Last 1000 yard group was around 5 inches I am running 70.5 grains of retumbo. this is a hunting rifle, and has been used as such, round count is 275 rounds, barrel was blued and duracoated over (some scratches on the duracoat) scope and rings not included with stock, stock is devcon steel bed = Richards micro fit Tac Driver $800.00 NO Scope or rings ------------------------------------------------------

Thanks its a great shooter

Agree I was there for 2 months at Ft. Lewis, nice pine trees but to many Democrats and Libs for me and that is a disease that cant be cured

looking for Antelope and Elk, my prefered taste :)

any good hunting near there?

the job would be near Clovis, never been to that part of NM

I hear you, we have had it, wife and I almost decided to retire to her country just to get away from this socialist BS. but I got a decent offer on a Hunting show to be a instructor and PH

Been stationed here now for a few years, retiring soon from the Army, after 24 years. looking to go someplace little warmer, so far my job perspectives are Wyoming and New mexico

same here -17 degrees and 3 feet of snow, cant get out to the range she shoots regularly out to 750 Yards, but now that winter is here not going to happen until spring, she was using a 6.5 grendel for deer, but I trained her on a 308, so she prefers it. she loves shooting https://www.facebook.com/photo.php?v=192324200817347&l=2865104264604757762

Yep she loves it

wife wanted a pink hunting rife PINK!!!!!!!!! I tried the new Duracoat in a can product in progress, still curing I added some colors so at least its semi Cammoed? also with the rest of the stuff I got her for X mas as you can see she likes Pink Cammo DPMS upper and Lower VLTOR stock Mega Arms 20 inch barrel this is the new duracoat in a can 2 in one, it works good enough but you have to keep it pretty far from the gun or it will run on you <iframe width="640" height="390" src="//www.youtube.com/embed/_onlukWppJU" frameborder="0" allowfullscreen></iframe>

this is a 24 inch stainless black coated from DPMS .260, complete upper with Brake that can be taken off easy with a set screw for use with a Can, 1-8.5 twist, low round count, I am 2nd owner I have only tried 3 loads in it, so far .46 inch group, I have 4 AR10 uppers and getting to many to keep, I use this the least, For-end is custom and gets smaller for better grip, still is free float, gas block is adjustable. this is DPMS pattern retirement from the Army is now 6 months out, bills need to go away complete upper $850 shipped CONUS or $600 minus bolt group and charging handle scope and mount not included. eaglemanarms@yahoo.com

standard gasport, here is a start, currently 20 inch barrel and a 308 -20 inch I built for my wife will cammo the 7mm08 hunting rifle the same as my woo K2

SPF

was looking at 162 grain for this barrel / my second one I just finished is going to be a 17 inch 7mm08 in 1-10 twist, I am thinking 120-140 grain I still need to thread the barrel for a flash hider

mild recoil, eject rear and right about 6 feet