neovader

I emailed Ramshot several months ago specifically about 150gr FMJ load data. Here is the load data they provided to me: 150gr Hornady FMJ 42.4gr start 2,715 fps 47.1gr max 2,957fps tested with 24" barrel calculate a -8.3% velocity drop with a 16" barrel

I resized some of the pieces that have these marks and it smooth out the marks and you can still feel a slight raise, but I guess the question remains would they be okay to load?

The shoulder isnt bent, looks more like it was pinched with a pair of pliers. Similar to a burr, looks like I could file it down smooth.

I've got some recently acquired LC 7.62 brass and I noticed some strange marks on the shoulders. It looks as though it were pinched and wanted to know if they were safe to load

Ditto on that brother. I've looked everywhere for the same info and there are tons of load data but all seem to be for 20"-24" barrels.

Just a quick question guys, I've installed a DD 7.62 lite 9" midlength HG on my Bushy .308. I talked to DD before buying the guard and he noted that the handguard would have a gap of .001 of an inch, barely noticable gap. Well I installed it and with either the JP gas block I've planned on using and the old gas block, the gap is more like a quarter of an inch. My question is any ideas on how to remedy the situation?

Look underneath your barrel and it will list what caliber it is chambered for.

Sorry for the noob question, but if I were to swap out the buttstock on the 308 ORC to a Magpul MOE buttstock, what modifications if any would I need to do. Thanks for your time.

I just wanted to ask what handguard is that on the lower gun. Sorry to bump such an old topic.