iitiimothyii

I cant seem to find any reasonably priced 5.2" buffers out there. Would you happen to know a company that makes them? Or would a heavy carbine buffer work just as well

If rifle reciever extension is the same as the buffer tube then yes that is my internal measurement(9 11/16") but the buffer after triple checking still measures 5 5/16". Do you have any experience with soft point causing issues and if so could you point me to your preferred deer/boar hunting round? But I'll go to a range this weekend and shoot without the compensator on to see how it functions.

Yes those parts are all by aero and this is the link to the compensator: https://www.odinworks.com/product_p/mb-atlas.htm the buffer is 5 and 5/16

I have a 16" wilson combat barrel and intermediate gas tube. I have a rifle length buffer system, lower, upper, gas block designed by aero. I have a prs stock and mag designed by magpul. I am shooting 180 grain soft points made by federal. I also have the odin works adjustable compensator on the barrel.

I also have the adjustable odin works compensator on it

The rifle is in 308 with a 308 buffer system from aero normal mass bcg non adjustable gas block and a 16 inch barrel prs stock from magpul wilson combat barrel aero lower

I have finished my ar build and I took it to the range to sight it in and it was cycling to fast pinching the round between the bcg and the barrel. I think i need a heavier buffer but cant find any adjustable or heavy rifle length buffers. Do you guys have any suggestions on what to do

I have an aero rifle buffer tube .308 rifle buffer and spring and an aero reciever with both an aero reciever lock nut and end plate

I bought parts here and there when I had the money. And sorry I'm new to how forums work this website is my first experience. I bought a buffer kit so all the parts fit together but when I go to put the lock nut onto it along with the end plate the is no thread left. All of my receiver parts are aero

I also forgot that a bolt is a part of a gun so I need help there as well1😭

I have no clue about buffers and I think I bought the wrong one so could one of yall point me in the right direction

I used the bigger detent pin and it is very crisp

My selector switch is a little sloppy is there any way to make it less sloppy or did I use the wrong spring

1.5 mil

I just figured it out it's a screw but what size and bit

So this is my first build and I am just starting it but I'm trying to install my belt catch but the lower receiver already has a silver pin in place that I do not know how to remove to put my parts in any help

Any opinions on fluted vs not fluted

Yes sir I think I'm going to go with a steel barrel because I hunt in some cold places so I think itll perform a little bit better for me

I was going to use it to hunt deer and that's normally at 100 to 150 yards but I would love to do a sheep hunt one day and definitely some hog hunts. I would also be doing plenty of target shooting for fun

What size barrel I was thinking 18" and I've heard that stainless barrels are better for accuracy

I'm looking at building a 308 ar for hunting and was wondering what barrels you guys would recommend