Mr B

I couldn`t have said it any better.

Cops - 1, douchebag - 0, thousands of tax payer dollars saved.

Pay back is a bitch, and they deserved it.

I just ordered three twenty round magazines, and an Armalite 30mm scope mount. It should all be here by the end of next week. If I can come up with some extra money, I want to order three more twenty round magazines before the government nazi`s ban everything.

I don`t know much about these rifles, so ive been searching and reading to try and learn about them. Is a CETME a good rifle ?. Ive read that some new CETME rifles have had problems with the bolt gap not being correct and having to replace the bolt and rollers to fix the problem. Is this a problem with these rifle, or something that only happens once in a while ?. I was at a gun shop two weeks ago and they had a CETME on the rack for $540.00 dollars, is that a good price ?. Any information on these rifles would be appreciated. If you have one, lets see some pictures of it.

Why is a free float rail so much better than a drop in rail (tube) ?, does it really make that much difference in accuracy ?. Ive been looking at the Superior Weapons System E1 free float tube rifle model, and I will probably get it, and that brings me to my next question, how hard is it to install it on an AR 10 ?. I have never done this before and have no idea how to do it, I also have none of the tools needed to do it. Would I be better off finding a gun shop that can install it for me ?.

Thats not possible, the rifle was shipped in a heavy plastic gun case with lots of padding in the case.

Im looking at a Mako Ergonomic pistol grip (AG43) for my AR 10B, and I was wondering if it would fit my rifle ?. Its made for an AR 15, but from what ive read some pistol grips will work on AR 10`s and AR 15`s. Being new to these rifles I not sure if it will fit or not, so im hoping someone here will know. If it won`t fit could you guys recommend a pistol grip of the same style that will fit. Thanks.

My budget is $300 - $400 dollars, and I would like to be able to shoot out to 500 yards if needed, but regular shooting would be 100 -200 yards. The simmons scope I was looking at is a 6 - 24 x 50mm riflescope

Ive been searching for a new scope for my AR 10, and I see quite a few that I wish I could afford, but I just don`t have $700 - $1000 dollars to buy them. I found a Simmons Predator Quest scope that I like but I want to know from you more experienced guys if this is a decent scope ?.

I can`t blame the dealer were I bought my rifle. He had to order the rifle for me because he was out of them. When I picked up the rifle it was still in the box the way he had recieved it. I picked the rifle up on friday 11/9/12 and didn`t get a chance to take it out of the box and look at it until saturday night. I will call my dealer monday or tuesday and see what if anything he can do to resolve this problem.

For what a SCAR costs thats totally not acceptable, and shows what poor customer service the manufacture has in not fixing the problem. I was looking over my AR 10 some more today and found another spot under the forward assist and below the charging handle were the finish is also missing. Im sure there are alot of people here that think im making a big deal out of this, but for what we pay for these rifles I would expect alot better. I have a DPMS AR 15 that cost less than half of what this AR 10 cost, and the finish on it is a hundred times better. You would think it would be the other way around. I will charge me digital camera and see if I can get some pictures.

Maybe ive been lucky in the past in that every new rifle ive bought has been clean and unchiped, but either way I like this rifle and once I get it dressed out the way I want it, it will be even better. What is the finish thats used on these rifles ?, what can I use to touch up the chip ?.

I did email Armalite, I will let you all know what they have to say if they get back to me.

The FFL I bought the rifle from had to order the rifle for me, it was in a sealed box and the dealer opened the box to get the serial number only, he did not fire the rifle. The rifle was not filthy dirty, but it was dirty from being test fired, and it has a chip in the ejection port. I paid almost $1500 dollars for this rifle and for that price it should be clean and perfect, not dirty and chiped. Maybe im making a big deal out of nothing, but it just doesn`t seem right to me.

I have bought new guns in the past that were test fired, they were clean and came with the two empty shell casing that were fired in the gun.

I just got my AR 10 A4 on 11/9/12, today I took it all a part and gave it a good cleaning and I found a couple of things that really pissed me off. I know most gun makers test fire there guns after there built to make sure they work properly. When I removed the bolt assembly from my rifle the face had little brass flakes all over it and the bolt carrier was also dirty inside. The ejection port on the upper reciever by the shell deflector has a 1/4'' chip in the black finish, and the shell deflector has a rub mark were the brass shell case hit it, and the barrel was dirty from the rifle being fired. I have read alot of good things about Armalite making a great product, and thats why I bought an Armalite AR 10, but if this is how they send there rifles out, then im not impressed with there quality control so far. After a rifle is test fired it should be cleaned and re-inspected before its put in a box and shipped to a dealer.

I just bought an Armalite AR 10 A4 with a 20'' barrel. This is my first AR 10, so im sure im going to have lots of questions when I start doing upgrades. After lots of searching for AR 10 forums, this seemed like the best one, so I decided to join the group. Mr B