Lowrider

I've read a lot of good thing on both H4895 and IMR4895, and from what I've gathered so far Reloader 15 seems to be good with both accuracy and velocity. I've got a bunch ready to test...from(RL-15) 40.75 to 42.2 gr. I'm using mil-surp brass so I'm starting lower (as advised) Thanks for the reply.

Here's what I have to work with so far, any dope on pet loads that I can work up to using the mentioned components (or close) would be appreciated. Armalite 308 with Rock 5R 18.5" barrel, match chamber, rifle length gas. LC brass, 210 primers, smk 168 and hornady 168a-max IMR 4895, RL-15, Varget. I'll take loads for the 175smk as well but don't have the bullets yet. Have you got a similar rifle? What load works best for you. Thanks

Hey Syrac where's my commission;) ? Better yet, where's that .875 block coming out?

Kool Thanks

Correct.

My bad, I was assuming you built your rifle. Good luck finding just what you need. It can be frustrating at times.

I see. Pray tell, why a hand guard with no accessory slots? The benefits of an adjustable gas block would be for shooting off a bipod, suppressed...sniping etc. That's a sweet looking handguard but looks more "racey" as in, full throttle to the 100yd or less battle rifle.

Which tube are you using?

Anyone topped their armalite flattop with Viper? Did you need a cantilevered or extended mount for eye relief? I'm using a magpu PRS stock and I think I've settled on the Bobro. Just wondering about eye relief though.

What size is your gas journal? .750? If so check out Syrac Ordnance. http://www.syracordnance.com/collections/all

The backplates from JP rifles fit APEX hand guards like they were a custom marry. I have a rifle length APEX and used the QD sling stud backer plate to attach my Harris bipod. Fit like a rite size glove. http://www.jprifles.com/buy.php?item=JPHGS

That Ph5 v2 looks like it incorporates the bolt catch and lever as one piece. Armalite has modified their bolt catches to work with Gen2 mags, am I viewing that pic wrong or is that v2 one piece, and if so will it work with the Armalite Gen2 Mag? http://www.armalite.com/images/Tech%20Notes/TECH%20NOTE%2071%20%20AR-10%20Magazines%20090603%20Rev%200%20Final.pdf Im guessing no.

http://yhm.net/index.php?main_page=product_info&cPath=14_18&products_id=308 This sound suppressor is designed so that it can be used with a Phantom 5.56 mm flash hider on a 5.56 mm rifle. This allows users to purchase one sound suppressor and use it on .30 caliber and 5.56 mm rifles. As a measure of safety the 5.56 sound suppressor WILL NOT fit onto a 7.62 flash hider/brake

nice looking block.

What brand is that block?