geistacwm

Thank you sir. Never occurred to me to run a second pipe to house the submersible. Already have pipe in the ground. Awesome.

I would appreciate it man.

Super over priced broheim. I know plenty of distros, but not the best pump for my requirements.

Probably not. Its 12v, which seeing as Im solar could work, but the gpm is so high, I don't think it'd have the torque to pull up out of the well and up the hill. Looking for more of a permanent solution. Thanks for the reply though.

Gents. My old pump has seized. went to buy another and reached a bit of a issue. Stumped the home depot kids and local shop. I have an hand dug well, approximately 5' wide, and 50 feet deep. I must pump to water tanks about 70 feet away w 50 feet of rise. The water is then gravity fed to my home. Plenty of water at around the 40Ft marker. The issue is this, I cannot use an average shallow well pump. They only have suction down 25 or so feet. Also, I don't think I can use even a low GPM deep well submersible because of the width of the well. Plenty of water at around the 40Ft marker. Can anyone push me in the right direction? Working on a slim budget as well. Worst case scenario, I can drag a well dude out, but id feel pretty bad about snaking his advice and denying him the work.

Way too few chops, way too many billet barges and zipperdos. Allow me to remedy. Because fucking Merica.

Gentlemen. Took this on a trade, but decided to build instead Early MRE m6a3 upper. Used. 14.7 nitrided/chf/6.8spcII Bore looks great. Stiff front sight(no play) This appears to be an early version. In addition to the early two piece carrier, it has some odd features. Pros/cons depending. 1st, it has a stepped barrel with 1/2 28 threading. Honestly, the upper feels less front heavy than I remember my other m6a3 being. Can include the SF brake shown for an additional fee. 2nd, the FSGB is pinned with roll pins. Not the usual impossible to remove factory pinning that dissuades lowly gunners from HG swaps. It may be a good candidate for a rail swap. Exterior is worn. It has a number "13" eched into the receiver. No dents or dings, so cerakote may be a decent option. Or, run as is, because **** show cars. Could be a cheap upper to build around. Looking for 800 shipped in the conn us. Please PM or email any questions. Happy to answer to the best of my ability. Plenty of feedback around. over a decade in the comm.

Gentlemen. Found this left over from my novy. Building a lr set now, and thought it'd be of use to someone. Happy to swap for lr308 parts of some kind. Wayyy to lazy to list my needs via iphone. Hit me up if you can use it.

BOTH SOLD---------------------

70 shipped on the rear troy sight.

Cant edit..... Scope mount sold.

Title says it. Both came to me in trade, but I prefer what I use. New in box Aero 30mm mount. (Sold) New (no box) Troy rear BUIS. Gold standard with lock UP feature(my preference) 80 shipped Please Pm or email questions. Plenty of feedback and over a decade in the comm.

Sold.

I appreciate it. My bad for not being clear.

Derp. 9mm doesn't use a GAS RETURN blowback. Bad info is bad.

Sorry Gents. 5.56 9mm doesnt use a blowback, 300 would not run with a carbine gas or piston system at this length. Only 5.56 and 6.8 are possible with pistons unless Im mistaken. Please pm or email and questions. Can't imagine Noveske being any better at this length.

Gentlemen Letting loose some parts i dont need. Factory pinned, spikes/lothar walther 10.5 barrel and AA piston setup. Everything you need short a handguard and upper. Super accurate for the length. Heavy contour. 400 or so on the barrel, cmt bolt and kit. Bushing not pictured but included. Looking for 350 dollars shipped. Pretty solid deal as i see it. Please pm or email. Better pics to come.

Sold pending funds.

Sorry boss, that was sold a while back.

850 Obo

Gentlemen. Pushing more towards other aspects of life, thus the guns are not such a priority. Got a fine ar308 upper here. Professionally assembled. Approx 400 on it. Specs as follows: Si defense upper Si defense barrel 14.5 1/11 carbine. Limited URX 3 transitional model. Slab side. Seekins adjustable gas block KAC sight KAC sr25 enhanced ch. Arma extended a2 fh(unpinned.). Looking for 900 plus applicable fees. Trying to build this up would cost well into 1300. Please email or PM questions. Over 250 in feedback around.

Poor company.

Dwep

Im sure he does not post at stormfront. You entertaining the idea solidifies my point.

Yeah. I might be alone in that opinion. Amongst others.