Zombie Thumper

That's what I figured..thanks

All the exhaust gases come back into the action & chamber and foul the gun..I didn't shoot that much but after a few sessions the gun would not cycle properly.. Even the ammo in the Mag got fouled & corroded..I don't have to have a silencer to hunt on my farm but there's an old Hermit's house on the property line and I just want to be as quiet as possible..

I have an off the shelf Remington GEN II 308 (and several other 308's like Smith&Wesson, REM R25, RockRiver)..I purchased a Silencer Central Banish 30 and have had very poor results..I guess the problem is to much back pressure..So can you put a Banish 30 on an AR308 ?..Or does the gun need some other kind of Gas System to operate properly ?..For now I put the silencer on my new Bolt Action 6.5 Creedmore for deer season but I really would like to hunt with my AR308 rifles..

Use promo10%off at check out.. everything ships for free

http://ar15xtreme.com/

Now that's $900 well spent.. I'll have to check to be sure Barnes or Hornady makes Lead Free ammo.. I'm sure they do

I think I better finish my Aero 308 instead..Just didn't want to part with the $900 for the Upper..Unless Aero has a 6.5 Creedmore, that's a different story.. I spelled 98Z5V handle wrong in the previous message.. Sorry bout that Tom..

I do have the Aero 308 Lower so that my 1st thought when I shopped recently for an Upper for the PSA 308.. If there are any unsightly gaps then I'll just leave the Aero Upper on the Aero Lower.. Weight is definitely a big consideration (after accuracy)..

Thanks for the Welcome.. I was here 3 or 4 years ago with my personal account under Zombie Tested and 9825V helped me troubleshoot some issues with the Giessele Trigger on my new RRA Predator 308.. This account is our Business ..So I'm not really new, I just didnt spend alot time here .. But I send our customers here with there questions about 308 compatibility ... We do have parts for alot of the different 308 manufactures.. Mostly Extended Pivot and TDP for LR308, Armalite 308, Sig 716, PSA 308, MP10, Aero 308 Pattern, RRA 308 and AR-15.. I have a G2 but haven't made Extended TDP's yet, they will be ready in about a month..

Thanks

I will stay away from the Clearance 308 Uppers.. I know better.. Nitride sounds like the way to go

Well then I will go ahead and buy another PSA 308 Upper to match my Lower and if it doesn't shoot the one inch groups I'm used to then I will get the Faxon 16".. thanks

Thanks for the welcome.. Its only since the Election and the big slow down in sales that I can find anything decent.. Finally the quality AR parts are available again

Ok, I would like to find a DPMS 308 Pattern Upper that is lite enough to allow me to use it for hunting..

I bought a stripped PSA 308 Lower about a year or so ago and at the time used my R25 (DPMS 308) Upper to complete the Rifle because at the time all PSA 308 Uppers were sold out..Everything shot fine.. About 6 months ago I bought a PSA 308 Stainless Rifle Kit with A2 frt site on sale for $599..I have at least 5 AR308's and all are extremely accurate.. I thought the $599 price was to good to be true and it was .. The groups were like 6 inches at a 100 yards with a Leupold Scope and Areo Scope Mount and 3Lb trigger pull, sand bags.. So I returned the Upper to be repaired and when they returned it they provided a signed letter stating they had installed a new Stainless Barrel.. Well, same thing.. Rifle shot terrible so I returned the PSA 308 Rifle Kit and got my money back.. My question is: I see smokin deals from PSA for 308 Uppers now all the time, they have a Stainless 308 Flat Top on there now for $469.. should I give up on the PSA 308 Upper and just use another brand to complete the Rifle ?