New Forster die set

[survivalshop]

 This is interesting , though I'm not crazy about the disclaimer about setting up the Expander stem, at the end 

30-06 Full Length Sizing Dies Unique to Forster Dies The combination of our elevated “E-Z” Out™ Expander Ball and butyl rubber Co-Ax™ Washer corrects misalignment of the Decapping/Expander Assembly and prevents the case neck from pulling off center during the expanding procedure. Our design also reduces the effort required to draw the “E-Z” Out Expander Ball through the case neck because it takes full mechanical advantage of the power developed in the linkage of your press. The elevated position of the Expander Ball means that the expanding operation happens with the press handle near the bottom, where it produces the most leverage. The expanding operation is hardly felt, making sizing much less laborious. The “E-Z” Out Expander Ball system requires that the Decapping/Expander Assembly be adjusted properly at all times. The Decapping/Expander Assembly is set at the factory; however, if the “E-Z” Out Expander Ball is readjusted and set too high in the die, case neck and spindle damage will result. See the complete user instructions for reloading and each sizing die.  - LEARN MORE Visit our Site BUY NOW or Find Your Forster Products Reseller

[planeflyer21]

Those are pretty cool.  Forster has always had a very good reputation.

That is a pretty harsh disclaimer.  Most likely it is saying "We already set this, don't be a dumbass."  Like the dude at our range who buys a $3000 custom race gun, then sets about to "fix it" and it quits working.