planeflyer21 Posted November 27, 2011 Report Share Posted November 27, 2011 Ok...I can't let this dead horse lie, I want that TacOps1 charging handle! So while cleaning the Freedom Machine today, I measured the stock RRA CH...in hopes that one of my 308AR brethren will measure their TO1 CH in the same areas.Maybe, just maybe, the critical dimensions are fine and only the tabs or body need a slight bit of stoning.Anyway, here we go. The stock CH is as follows:.401" wide on the body, .491" wide at the guide tabsThe guide tabs themselves are each .120" tall, and are flush with the bottom of the CH body.615" tall at the gastube end, .298"-.300" tall along the length of the bodyEach of the flats on the top are about .155"C'mon folks! Who can help me out with a few minutes measuring here?Thanks!Jon Quote Link to comment Share on other sites More sharing options...
imschur Posted November 27, 2011 Report Share Posted November 27, 2011 Jon have you emailed these dimensions to Mecharmor? I cant get at my stuff for a day or two Quote Link to comment Share on other sites More sharing options...
planeflyer21 Posted November 27, 2011 Author Report Share Posted November 27, 2011 I have not but, if I do, I have no doubt they will call me within minutes of getting the email! They're good that way...part of the reason I want them to get my business!I'm kinda swamped so not in a rush.Jon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.