80% lower - looking for CNC files

[Jeshelto]

I have a DPMS 80% lower that I'm looking to drill out (or get some help drilling out for anyone in the San Diego area). I have access to a CNC machine but I don't have the files or program required to do it. Does anyone here have advice on this?

[darb]

I have a DPMS 80% lower that I'm looking to drill out (or get some help drilling out for anyone in the San Diego area). I have access to a CNC machine but I don't have the files or program required to do it. Does anyone here have advice on this?

Which manufacture made your lower? There are several.   I know of Quentin and Tactical Machining and their measurements on the blueprints are not exact which could throw off the placement of your firecontrol group. At least that is a problem I had.

[Toolndie7]

I have all the geometry that is correctly drawn that I could send you, Would you be machining this yourself?

Edit: tactical maching lowers are right on the money. Most errors are made in armalite/DPMS in regards to locating trigger pins. There is .059 difference between armalite and Dpms prints.

Edited October 21, 2014 by Toolndie7

[Jeshelto]

My lower was made by Ares Armor, I'd love to get those files if you don't mind!

[Jeshelto]

And yes, I'll be machining it myself