SICARIO

Word on the street is Bergara barrels. I picked up a 16" one and am happy so far. Here's a review I did on it: http://northwestexpeditions.blogspot.com/2014/03/mega-308-barrel-review.html

Up for sale is a lightly used (100rnds) Fulton armory Titan barrel, made by Criterion. 308 win chamber DPMS/SR25 Barrel Extension 18.5" long 1:10 twist 0.75" gas block Chrome lined steel barrel Rifle length gas system Light weight profile (2lbs 6.5oz) Comes with rifle length gas tube $315 Shipped **ALL SOLD**

Burris XTR 1.5-6 for sale. **SOLD**

It uses a DPMS bolt

Up for sale is a 16" Kaiser Technologies barrel, chambered in 7.62x51. It's had 60rds down the tube. Comes w/ the Armalite Midlength gas tube. Barrel has also been dimpled for a low-pro gas block (two dimples). I picked up a SS Barrel, so this one needs a new home. **SOLD**

Looking for a Mega MaTen receiver set locally in the PDX area. Can throw in a DPMS AP4 receiver set as part trade

It's a 9" for a DPMS, nut and wrench

Sounds good

Up for sale now, anyone interested?

Made out of 6061?? Aren't the normal ones out of steel?

I may just have to pick one of these up when they become available. 13.8": http://store.troyind.com/13_8_MRF_308_BattleRail_Black_p/strx-e3a-13bt-xx.htm 12": http://store.troyind.com/13_8_MRF_308_BattleRail_Black_p/strx-e3a-12bt-xx.htm 7.2": http://store.troyind.com/13_8_MRF_308_BattleRail_Black_p/strx-e3a-72bt-xx.htm

Well, I just ended up ordering two Phase 5's, one for my AR and one for the 308. That way I can have as much redundancy between platforms.

I have the Burris XTR 1.5-6 w/ the 7.62 BDC on mine and really like it.

for the AR-15, would you stick with the BAD lever, or go with the Phase 5 1 piece lever? Trying to decide between the two for my AR

It appears to be the only company i can find that makes a 308 compatible extended release. I especially like that it's a welded one piece unit, no little screws to come loose. I'm thinking of getting both the 308 and AR15 version for both of my rifles

Anyone have experience with the Phase 5 bolt hold open lever? I'm about to buy one, and am curious if there are any reviews.

Brand new Vortex Flash Hider for your 308, never mounted. 5/8-24 thread SOLD

Well...no good justifiable reason to get rid of it. I've been interested in trying out a midlength gas system, and the new kaiser barrel with the Ferritic Nitrocarburized finish has really caught my eye

The Larue LT-104 works really well. It sits a little higher than the lt-158 (1.5" vs 1.44") but it doesn't have the 10MOA built into it. I talked with Larue about which would be a better choice for the 308, here's what they said: "Depending on how far you are shooting, the 10 moa will make a difference. If you want to be able to dial adjustments out past 600 yards up to 1000 yards, you will need the 10 moa base. If you know you will never dial adjustments beyond 600 yards, then you'll be fine with the LT104. Both mounts will clear the Troy sight" I figured since I wouldn't be making adjustments (I've got the 7.62 ballistics reticle on the scope), the lt-104 would be perfect, and it's the same mount I have on my AR.

Hey there, new to the forum, but not to AR's. Here is my DPMS 308 in it's latest configuration. Glad to see there's a forum dedicated to this awesome rifle. Additional pictures: http://northwestexpeditions.blogspot.com/p/ars.html Mods: # Stock: Magpul CTR # Magpul ASAP Plate (for the MS2 Sling) # Grip: Magpul MIAD w/ Grip Wedge # Charging Handle: BCM Gunfighter Mod 4 # Trigger: Geissele SSA # Pins: KNS Anti walk/rotate pins # Front/Rear Flip up sights: Troy # Scope: Burris XTR 1.5-6x40 (w/ Hunter Turrets) # Mount: Larue Tactical LT-104 # Magazine: PMAG 7.62 # Rail: Daniel Defense 7.62 12.0 (now a 9.0 rail) # Barrel: DPMS AP4 (reprofiled by ADCO for reduced weight) # Forward Grip: Magpul AFG # Forward Sling Mount: Daniel Defense # Flash Hider: DPMS Panther (soon to be Vortex) Will be installing a Kaiser barrel shortly Ah, and of course, can't forget to show success pictures:

I'm a mouse click away from buying one of those kaiser barrels. Interested to hear a range report.

I've got an AP4 barrel that has been lightened by ADCO. Comes w/ ADCO cut down gas block, tube and panther flash hider: http://308ar.com/forum/index.php/topic,956.0.html $250 Shipped

Up for sale is my DPMS LR-308 AP4 Barrel -100 rds fired (barrel break in was done exactly to DPMS's specifications) -barrel has been re-profiled under the handguard by ADCO and entire barrel re-parkerized (cost me $90 for work&shipping) -gas block was cut down and contoured by ADCO to fit under a longer handguard (cost me $38) -CAR gas tube is included (worth $10) -Will also throw in a Panther Flash Hider (new is $45) Barrel new from Midway is $230+shipping (add $90 & $38 for custom work, $45 for flash hider and $10 for the gas tube) barrel is worth $413 *SOLD*

Up for sale is my 98% condition DD rail off of my DPMS 308. I've mounted it, shot it twice and am pulling it off for a different rail. Comes w/ the wrench that they charge you $10+shipping (plus they're currently out of stock) $300 $280 SOLD

Put me on the PM list as well. Thanks