Lon Moer

DPMS just released the DPMS GII (thats G two ;) ) Everything from the magwell back is standard AR15, apparently including the recoil spring and buffer. It has a new lightweight bolt carrier and a relocated foreword assist.

Previously CMMG had DPMS pattern 308AR lowers that used G3 mags and one that used FAL mags, but now CMMG has seriously cut back on their offerings and they only offer standard DPMS pattern 308AR's now

The magazine release is the same. And for us CA people the Bullet Button is the standard AR-15, too.

Got my BCG in the mail today. I called and paid for my auction on fri morning and the package was here on mon. :) The BCG dropped right in to my Red-X Arms upper. And while the auction sellers name and contact information were kind of confusing, the package shipped from a company called EliteTactical Advantage.

While I too am a WECSOG graduate, I also mangled the A2 FSB on my DPMS LR308 barrel through repeated install/removal (while cutting on the shoulder behind the FSB to try and fit a front handguard cap).

I just got mine, and since I was given the referral, I'm passing it on. I talked to these guys today when I was paying for my auction they are literally selling hundreds, so refresh the page after you use the link, to get to the current auction.. http://www.gunbroker.com/All/BI.aspx?IncludeSellers=1050897

About a month ago I had two 2,100rd "pails' of .22lr loaded in the online cart at the Cabela's website, and then went to sleep. The next day I went to check out at Cabela's and they were sold out. :( A couple days later I saw a post on another website and I jumped on a 5K case of Eley (38gr @.06rd/shipped) from J&GSales, but they also sold out in about a day.

Full page ad in Sunday's Denver Post;

??? Magpul threatens to leave state over gun bill

Well, I also posted this question in the 'AR Variants' forum on ARFcom and got this reply; Which sounds very much like HK, but is still somewhat disappointing. ???

They're a freakin' hundred bucks apiece <laughs>, so I'm not going to be buying any, but I was just wondering if they worked with DPMS pattern AR308's? Or if anyone had tried them out?

Got my 308 CAR heavy buffer/spring set-up this week, and I wanted to say DAMN this thing is beautiful! <thumbsup> The machine work and construction are far superior to the regular AR15 rifle/CAR buffers I've ever seen, its almost a shame to hide it away inside the buffer tube.

Like others have posted, I started with .22's. I got my first non-airgun at age 9, the 'family hand-me-down', a Remington 550-1. Still have it. :) The first gun I paid for myself was a Squires-Bingham(Armscor) M-16. My dad had to actually buy it for me. :P Still have it. The first gun I bought for myself after I turned 18 was a Ruger 10/22. Still have it. The first internet gun board I was ever on was at Rockin' Rimfires(the posting forum is long gone) and then on to rimfirecentral.com And a picture of my custom ruger 22/45 mkII.

just ordered the heavy buffer and spring package from Slash(Heavy Buffers.com) <thumbsup>

Well, I'm still a beginner at doing my own pictures, so sorry about their quality. <dontknow> Here is a comparison; the DPMS screw/pin is on the left and the allen wrench it uses, and on the right is the silver dowel pin and set screw from TM and the smaller size allen wrench. Here is the dowel pin going in [img width=810 height=607]http://i403.photobucket.com/albums/pp112/Lon_Moer/2011_01011LM0009.jpg Here's the set screw for the rear take down pin detent and spring. The set screw allowed me to set the tension on the spring and adjust how tight I wanted the take down pin to be. [img width=810 height=607]http://i403.photobucket.com/albums/pp112/Lon_Moer/2011_01011LM0003.jpg And complete so far. [img width=810 height=607]http://i403.photobucket.com/albums/pp112/Lon_Moer/2011_01011LM0002.jpg I just got my upper receiver from Red-X Arms, some PMAGS and some barrel parts. I'll post up some newer pictures soon. Thanks all! <thumbsup>