Cali_Ed

I took se brass I tumbled in that and tumbled it in ss and I was surmised how dirty it still was

Does 11.25 make a diffrence compared to just 11?

Seating of heave projos, I've seen some 308 200 smks, what are these used for?

Actually I have leaves the brass very dusty. Maybe you will have a better experience

Yeah mind works well but kinda loud Nd I don't have concrete to whack it on I use my desk leaves dents lol and the end of my bed frame

ask me how I know I'm the resident 800 meter guy

Some blue Frankford thinking of maybe getting a die bullet puller

I accidently enlarged one of mine went in to easy went to the range fell out when round was engaged

Lol they are flipped

Well after 40 minutes of pulling bullets with this damn thing I have to whack, I've restarted. Anyone else do this? Keeps from double charges, helps me anyway.

I haven't purchase any brass yet, and I don't think I plan on buy new brass until I get a bolt action down the road. Shoot I got 400 cases of hornady match brass free lol

Nah, like I said rather get owned here then at the range. I got excited reloading is fun, but I do need to start triple checking and slow down a bit. Thank you sir.

Thank you

I'm usually pretty strict on what I do and read, had a brain fart. Glad I held of shooting those from gut feeling. Somwtimes i feel like im asking dumb qusstions ect, but i rather get my ass handed to me here than at the range. Thanks for the scolding brother 98!!! I will slow it down a bit and quadruple check poop

Well I'm a fn idiot lol, I forgot I took a picture of the hornady load book for this projo. As always thanks brother 98 color code works ;) Max charge using rl15 is 47.2!!! Which my max load I loaded was 47.1 just need to make some lower loads to complete the minimum to maximum load which I may hold of on and pull the load depending on pressure signs. Ah fack it gonna re do that whole batch. I'm usually pretty strict on what I do and read, had a brain fart. Glad I held of shooting those from gut feeling. Thanks for the scolding brother 98

I suppose I'll have to contact alliant then. Because the data I got was from the sp round not the fmjbt because they didn't show it for the 150gn. They did have a 155 bthp but idk if that's comparable 308 Win Speer 150 gr SP IMI 2.7 22 CCI 200 Reloder 15 49 2,919

Looking to buy some brass in bulk don't want to pay more for lr if it's the same as the lc. And thoughts on winchester brass

From Danes load I may be ok, just need to back the projo of a bit

For some reason I can edit it my message above but, it was a max load for the 150grn sp from the alliant wensite But there also is a charge max of 43.5 for the 155grn fmjbt would that be the same and a minimum c.o.l of 2.775..... good grief may have to pull those 20 loads I made booo would the 150 and 155fmjbt be thrown in the same group

No I don't like living in the edge, I cut it by 10%.

Hey all is there any diffrence in the two? I read the only diffrence is the lclr doesn't have a crimp?

I didn't hear one but I didn't have my ear next to the press. I'll have to listen for it next time. So if it takes two safe to say the loads to high even tho the peak is 49? But! I had to apply a little more pressure then normal

These bullets do have a cannelure, I read I didn't necessarily needed to seat to it in a 308. The the bullets are seated just under the bottom line of the canelur.

Reloaded 15, hornady 150fmjbt, not sure what a compressed powder would be unless that means I pressed it down with something which not the case.

No changes being made to the die