Ksgunguy

any links on mounts I could use?

Hi All, I have a Vortex PST 6-24x50 FFP on my current 308 AR and want to also attach a Red dot scope on the side. need some recommendations on how to attach it. thanks in advance

Hi all, so I finished my build and today was the first day I had a chance to shoot it. I only put 8 rounds down range before the rains came. Things I noticed was the first few shots the empty rounds did not eject. So I adjusted the adjustable gas block and the rounds went between the 2:00-4:00 o'clock direction. Some of the casing noted to be slightly bent ( not at the primer side of the case but the other side, the open side where the bullet is seated). I know I need to shot a lot more to get it broken in, but not sure what to expect. Afterwards I cleaned the barrel and dunked my BCG in mobile 1. I also had new magpul 20&10 round magazines so I just filled them up with ammo and hope to get those broken in as well. Suggestions ???. Or do I just keep on keepin on

Thanks will send target pictures once the weather gets nicer. Go Wichita State university !

Ok, done!!!!!!

No i'm not, I live in Wichita. but if you find you decide to go. let me know how it went

Sooooooooo what you are saying is a Clean gun is a safe gun?

Is this what happens when you do not check the head spacing?

I love my M2

I already have the vortex PST 6-24x50 awaiting on my ADM mount. will take final pictures before the cerakote custom job

here she is

What does everyone think about that ? Colt paired 60 million for them

I was wondering the same thing since his website says these are hand lapped ? What I really want to do is just shoot it . What's the worse that can happen?

So I received my barrel and was reading the instructions to properly break in the barrel: 1. clean barrel after every shot for the first 10-12 rounds or until copper fouling stops with a wet patch of solvent. 2. wet the bronze brush with solvent and stroke the barrel 5-10 times followed by another wet patch and than a dry patch 3. soak the barrel with a strong copper removing solvent until all the blue mess is removed from the barrel 4. start shooting 5 shot groups and clean after each one 5. after 25-30 rounds clean at normal interval of 10-25 rounds 6. you barrel is now broken-in my question is when I stroke the barrel with the bronze brush do I go back and forth or do I go foward and take the brush out and than repeat again. I was always taught to never go backwards. I's kind of like poop shoot. exit only thoughts?

I saw a how too guide here: http://point3airsoft.com/services/custom-paint-stencils/ but want someone other than me doing it

Any body know of a goo shop to send my rifle too?

so were can I go buy those gauges with the cut-out on the bases? daddy like alooot

10-4

Ok, So I went ahead and got the Lilja 18" barrel and the SI Defense NIB BCG. is there anything else I need with the build? Just put it all together and shoot :sniper:

I'm thinking about getting one of those 308 BCG too. how does everyone like them?

I was thinking possibly getting a Lilja 18" AR10740 contour barrel. anyone have thoughts on this barrel? its ~2.3pounds

I want to first thank brother Robocop1051 for all the help he has given me. Much appreciated for him taking me under his wing. he was able to build me a blue print on what I need to build a hunting rig. So far this is were I'm at: SI Defense Gen4 Receiver Set Geissele SSA-E Trigger Ace ARFX Stock XH Heavy Buffer APEX 15" Handguard (w/o top rail) BAD Inc Ambi Selector with the hybrid and short lever in stainless steel Phase 5 Bolt Catch/Lever Mech Armor Defense "TacOps-1" Charging Handle Armalite AR10A Magazine Release Larue A-PEG grip in dark earth that I had to use a Drexel to get the damn thing to fit on my lower What I have left is the Fulton Armory BCG, barrel, gas block and tube, ADM recon mount That do you guys think so far?

anyone grill deer heart and have a good way of cooking them?

for sure looking for a QD mount

I'm doing my first build with the help of brother ROBCOP1 and need to see what people like better and why with the scope mount (also the model they are referencing) . I have Viper PST 6-24x50 FFP. thanks in advance