Patrad

Preciate it. Apologies for all the effort ya had to put into it. It'll make a good paperweight!🙄 Still have my address?? Y'all take care, Mike.

Just realized that I hadn't typed at ya lately. Don't wanna bug ya, but have ya had a chance to find that #%&*() bolt? Y'all take care, Mike.

"REV IT AND DROP THE CLUTCH!!! If you fucked the shift up, DOUBLE CLUTCH IT AND HIT IT AGAIN!!!" Since I was a drag racer for years, I can give that one a BIG Helle Yeah!🥂 "REFUSE TO GROW UP... " That's been #1 with me forever!!👌😜 Right up to my very last breath, I'll still be refusing to grow up! Even though I'm not the adrenaline junkie you are, when ya get right down to it, we're all hard wired in the brain pan one way or other. Cheers!🥂🥂🙃

You say that like it's a bad thing, Doc!🙃

'Preciate the heads up Matt! 98Z: "So, bottom line - I didn't get that pin out. Another bottom line - the bolt isn't gone. I just need to find out where it is NOW... " Holy sheepsheeiitt, batman!!😲 That's one heckuva development!! Here's to you🥂 - May you have clear sailing from here on!!! As to your question about the Bolt From Hell's previous history, I can't tell ya what happened to it before it left the factory, only what I've previously said in these here comments. I was wondering the same thing. Hadda be some serious sheeiitt, though. Y'all take care, Mike.

Mornin' 98Z. Just following up on that bolt problem. Last info was that you were gonna try heat to free up that retainer pin. Didja get to it yet? Just being curious - hadn't thought about the dang thing recently, until I did🙃 TIA, Mike.

Not a problem, never expected ya to put this much effort and time into the dam thing to start with. Again, I appreciate yer efforts! 🍻 It'll look nice in a frame above the couch 🤪 ☺️ As to what doc said, wouldn't blame ya fer givin' it that kinda shot! 🥃 Yeah, this time of year around these parts, we understand about those 250* sidewalks too. Be more than happy to get a (or several) cold beers if ya get over thisaway! Y'all take care, Mike.

Mornin' 98. Just realized that I hadn't spoken to ya about that PITA bolt in a while. Have ya had any luck? I certainly appreciate the effort you've invested! So, if you're tired of messing around with it, just send it back to me - I'll frame it, or something!!🙃 Y'all take care, Mike. PS: Also sent ya a PM a few days ago.

So.... today *SHOULD* be my last parts delivery Ended up with a .308 16" heavy profile barrel (because that's what I could find in stock) w/ mid length gas; homebuilt lower with a CMMG premium LPK; a HeavyBuffer spring & 6.5oz buffer kit; Magpul Pro BUIS front & rear; Magpul CTR stock; a Toolcraft NiB BCG from SpiceTac here in FLA.; Magpul vertical grip; Radian Raptor LT CH; JP 3.5lb trigger & hammer springs; and I also did some polishing on the hammer & trigger. Built it mostly for close in stuff, like a brush gun - we rarely have anything over 100-150yd shots (more than that & the 20" can handle that😉) here in C. FLA., but wanted a .30 caliber that can get through the brush it encounters. Not planning on any optics at this point, just the BUIS. I already have a Magpul MS4 sling that's an either/or 2 point/1 point QD sling. With all that, I am open minded about selections and opinions!🥃🍻 I differed from the 20" with the BCG - Toolcraft NiB for this one and a Brownells NiB in the 20". Still have some more breaking in on the 20", and then this one. The sooner the better. Updates as they happen. Y'all take care.

That was my idea as well. Many thanks for the clarification on the spacer.🍻 At least I wasn't totally AFU on the spacer - just off a bit.🤪

I'm still deciding on the RE - all 7" mil-spec types. The buffer and spring that I ordered from Clint is what he recommends for a 7" RE - its the Car-10 XH @ 6.5oz plus matching spring (UPS says it'll be here Tuesday). I'll be using a Magpul CTR stock. I'm aware of a spacer that goes in the RE, but I believe it's for a rifle length RE - yes? no? I'm always open to different or new ideas😁 Waiting to order the last of my goodies (including the RE) until after this coming Wednesday due to being on a fixed income. This fixed income stuff SUCKS!!!🤬

Many thanks, 98. Just my luck - a day late! My buffer and spring has already shipped. Dam!!! 'Preciate the heads up anyway.

So...., just ordered another XH buffer/spring combo from Heavy Buffers. Not ordering anything else until next week. Still gotta get a set of Magpul Pro sights, RE tube, a couple accessories, and machine the lower. Gonna use the orig BCG. Gonna be fun for the break in!!😁 Then comes the assembly itself!🤪

Just ordered a buffer & spring combo from Heavy Buffers for my 2nd 308AR. A 16" this time. REALLY pleased with the 1st one. Clint is a GREAT dude to deal with!

Looks like a great project. I've grown very fond of my #1 MKIII!

My new 16 incher got here Friday, but I'ma gonna let it sit here on the bench for awhile. Got most of the goodies already, but still hafta make up my mind on a coupla things yet, mostly the RE, spring, and buffer. Leaning toward the Armalite kit. Got a HeavyBuffers kit for the 20 incher with a 6.5oz buffer and matching spring. Still cogitating on it, though. We shall see. In the meantime, I'll work on getting back to the range for some more break in on the 20 incher - got 80 through it now. Y'all take care, Mike.

Dammit man - didn't mean for ya to hafta work so dang hard! Never woulda figured ya as a quitter, either. Got all the confidence I can have that ya won't let that fuqr whup ya! After all, better to be pissed off than pissed on!🥃

Depends on yer definition of "corrupt", eh?

Different is good - no boredom thataway! Then again, can't really see that as a problem 'round here!! Tip - stay away from libtards!!🙃 Dammit man - figured this might be my new home. Purty plain now.

Alls ya can do is try!😉🥃 I'll say this - y'all are sure as hell entertaining!

Hijack!??? Wut? Where?? When??? Wutthehell y'all talkin about? Never noticed.

Notified today that my new 16" upper is shipping tomorrow!

Stay optimistic, Bro! Seems like it takes forever, but it'll happen for ya.😎 I can say that it was MOST EXCELLENT for me when mine was paid off!😁🥃 Y'all take care, Mike.

Congrats! I can hardly wait for the 1st, and my pay off!!🥃

Should have read "schiff" instead of poop - missed the autocorrect dammit! Same here!🙃 Got excited about the upper - sorry.😉