spamking Posted August 17, 2016 Report Share Posted August 17, 2016 16 hours ago, survivalshop said: There are actually a lot of good choices out there now a days. & some good threads on them in the 308AR build & parts Sections . I've been trying to go through all I can . . . tons of info to try and process. I'm just thankful for the forum and will definitely use it as a resource. Quote Link to comment Share on other sites More sharing options...
Cbabin03 Posted April 3, 2018 Report Share Posted April 3, 2018 So I know this is a whole two years later (LOL) but did you have any problems with the D. Wilson BCG inside the PSA PA10 upper receiver? Because I’m building one also, and looking for a BCG that will actually work and seat. Thanks. Quote Link to comment Share on other sites More sharing options...
CASEYPM Posted April 3, 2018 Author Report Share Posted April 3, 2018 (edited) It runs perfectly! From what I've read about the bolts PSA offered on their website, I lucked out by not getting one of theirs. At first, the ejector spring would carve out a semi-circle shaving off the brass, but it corrected itself after about 300-500 rounds. I don't have access to a "go or no go" headspacing tool and this may be attributed to a headspacing issue with the Anderson barrel. It did take a while to break in and seat the rings, but now it'll go into battery with a small push from my pinky finger with the lower removed. The fit is perfect. After it's been broke in, the bolt carrier glides back and forth with no typical scraping sound from an AR with the upper removed cycling the BCG. You may have read in other threads of mine that I had short cycling issues and that was due to the Anderson barrel having the Armalite "AR-10 carbine length" gas port and was corrected after purchasing a Armalite gas tube which was like 0.5" longer than a mid-length gas tube from an AR-15. Hope this helps you! Good luck! Edited April 3, 2018 by CASEYPM Quote Link to comment Share on other sites More sharing options...
CASEYPM Posted April 3, 2018 Author Report Share Posted April 3, 2018 This gun was a PITA to get everything fitting right, but I'm actually glad I built it instead of bought it completed. I'm still having issues upgrading it trying to find a 9.4" handguard... I know it inside an out. Did I mention that I'm putting 0.85" patterns on paper @100 yds with a sub $1000 AR??? Quote Link to comment Share on other sites More sharing options...
Cbabin03 Posted April 3, 2018 Report Share Posted April 3, 2018 Awesome looks like I’ll be going with D. Wilson BCG whenever it comes back in stock then. Hopefully it will seat with the barrel of choice in making. Quote Link to comment Share on other sites More sharing options...
Cbabin03 Posted April 3, 2018 Report Share Posted April 3, 2018 Are any of you experiencing problems running a different DPMS barrel with the PA10 upper that’s not PSA’s barrel. Because I’m looking to purchase either a Ballistic Advantage or Wilson combat barrel Quote Link to comment Share on other sites More sharing options...
sketch Posted April 4, 2018 Report Share Posted April 4, 2018 13 hours ago, Cbabin03 said: Are any of you experiencing problems running a different DPMS barrel with the PA10 upper that’s not PSA’s barrel. Because I’m looking to purchase either a Ballistic Advantage or Wilson combat barrel as it goes bolt and barrel should head space togeather.. some manufacturers varry ish. mounting to a pa10 upper im not sure but it should work. maybe note the castle/ barrel nut thread pitch that you intend to use. if its the psa that it came with its gtg. make sure the bolt and barrel match up?mo better info to come ..i dont have a psa10. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.