geistacwm Posted July 13, 2016 Report Share Posted July 13, 2016 Gents. Looking to part with a couple projects in favor of travel. I found these to make for great, American made pistols. Bought more than I need realistically. These slides were purchased from an employee early after para was usurped, and are factory assembled. NOT the hack jobs being offered on ebay. The frames were sourced from the same source as para, to assure a good fit. And it shows. all lower internals will need to be sourced. Ill be to happy to help. All are unfired. kits come as follows: 1. Para pro comp 9mm kit-$700 Complete slide, matching(ion bond) controls(thumb/slide rls/beav). 9mm extractor Railed 80% frame. Stainless. 2. Para pro comp 40 kit-$650 Complete slide, matching(ion bond) controls(thumb/slide rls/beav) Railed 80% frame. Stainless. 3. Para 45 commander-$500 Complete slide, Wilson BP safety, early NH slide release. Unrailed commader frame. Stainless. (extractor and Msh hole need drilling) price reflects it. I purposefully matched the ion bonding to give the option of refinishing/polishing only the frame. The two pro comps would look great completely done, especially with the black(ion bond) barrel. All controls can easily be polished to stainless and came from para direct, or from factory pistols. I have over 300 in fb and a decade in the comm. PLEASE ask all questions beforehand. Prices are fairly firm. NO SWAPS. WCS, I keep em to build for a friend. Buy two, and Ill give you a smoking deal on a stealth jig and what remaining of my smithing box(spring sets etc). Please email or PM. Thanks! In order listed: ------pro 9mm -------pro 40 -------com 45-Pics do not show the correct controls. Happy to take another shot. Link to comment Share on other sites More sharing options...
mrmackc Posted July 13, 2016 Report Share Posted July 13, 2016 Don't need any pistola parts ,but am wondering how you came out on the water pumping project? Link to comment Share on other sites More sharing options...
geistacwm Posted July 13, 2016 Author Report Share Posted July 13, 2016 I fixed this issue with help I received and am thankful for it. Good flow given the wells capacity. Link to comment Share on other sites More sharing options...
darb Posted July 14, 2016 Report Share Posted July 14, 2016 Sent PM Link to comment Share on other sites More sharing options...
geistacwm Posted July 14, 2016 Author Report Share Posted July 14, 2016 Both 40, 45 and the jig are Spf to darb. Thanks again for the convo. Link to comment Share on other sites More sharing options...
darb Posted July 14, 2016 Report Share Posted July 14, 2016 The convo may have just began. Link to comment Share on other sites More sharing options...
Recommended Posts