Battle Arms MRAD brake

[Battle Arms Dev]

;)

[Robocop1051]

Damn it! I just bought a new Battle Comp.

[Battle Arms Dev]

We carry Battle Comps, and we're good friends with the good folks at BCE.  The brake isn't meant to compete with Battle Comp, as they serve different purposes. 

As a brake, it has the side blast and loud report, though a brake may reduce recoil better, it does nothing for the flash signature.  Battle Comp is a blend of features, which makes it unique.

[Battle Arms Dev]

Originally designed by Randy Cain of RD Precision for precision bolt rifles, the .308 and 6.8mm MRAD brakes also work on the AR system with 5/8 - 24 threaded barrels.

As designed, they are meant to be installed by a competent gunsmith that will thread the customer's barrel for a precise fit, for ARs with existing threaded barrels, a shim kit may be required to eliminate the gap between the brake and shoulder of the muzzle (shim kit is an option when ordering the brake).

The MRAD brake has a cross bolt at the bottom to allow easy indexing.  The ports are canted toward the rear by 10 degrees, and they are also canted upward by 10 degree (port openings are wider on the bottom)

[img width=810 height=607]http://i75.photobucket.com/albums/i314/Duffypoo/001-2.jpg

More pics on an AR10 [:P]

[img width=810 height=595]http://i75.photobucket.com/albums/i314/Duffypoo/AR15brakecloseup.jpg

[img width=810 height=715]http://i75.photobucket.com/albums/i314/Duffypoo/AR10brakefront.jpg

[img width=810 height=387]http://i75.photobucket.com/albums/i314/Duffypoo/Untitled2-4.jpg

The MRAD brake is available on our site here :)