DPMS SASS compatible with DD lit rail?

[Reece]

Noticed on DD's web site they mention the rail system isn't compatible with bull barrels. Does the sass barrel work with the lite rail? Was planning on using the rifle length free float tube.

Also, what the hell is up with JP's lead times on BCG's? I have a current back order on one, and can't seem to get any feedback from them.

[Reece]

No one has a mega MA-10 set, DPMS SASS barrel, and a 12" Daniel defense lite rail?

Is the SASS barrel considered a bull barrel?

[Zebra644]

I believe its a medium contour and should be okay. The bull barrel I believe they are talking about is the heavy 24 inch stainless like on the LR-308 B 

[soofley]

found this old link. this guy seem to have DD Lite 12.0 and DPMS SASS midlength tube by the looks of it

http://www.ar15.com/archive/topic.html?b=7&f=120&t=765144

Edited May 18, 2013 by soofley

[Reece]

Thanks gents for the replies. I'm still up in the air, as the rainier arms 11" tube is catching my eye as well.

I just can't get over the " purpleness" of the anodizing compared to the receiver set in the photo of the asseymbled rifle they have on their site.

[Zebra644]

Do you have the high rail upper receiver without the forward assist and dust cover or do you have the newer low profile upper with the forward assist and dust cover ? There is a distinct difference in height. Troy industries makes a the MRX Quad rail not to be confused with the TRX. The MRX is a free float and comes in both heights to accommodate for the olde and new profiles. Make sure you know which one to get.  

[survivalshop]

Thanks gents for the replies. I'm still up in the air, as the rainier arms 11" tube is catching my eye as well.

I just can't get over the " purpleness" of the anodizing compared to the receiver set in the photo of the asseymbled rifle they have on their site.

Just oil the receivers & they will go to a black color . I thought the same thing with the Tactical Machining receivers.

[Reece]

I'm building off of a mega Ma-TEN set. Should I be looking at any particular FF tube with the mega? I like the look of Daniel Defenses locking methods, with the opposing Allen screws and all. Just looks solid.

[Zebra644]

The Mega Arms is as you well know a SR-25 / DPMS Pattern and the Daniel Defense will work just fine as well many others that use that barrel nut pattern. Some will come with their own specific barrel nut that is required so that the rail can attach to it. So research Daniel Defense line of free float rails, if you want it , buy it,  they make good stuff.