moagm316

I was thinking about getting one of these to coat with Nickel Boron like my spikes battle trigger. It is an experiment. Mwahahahahahaha

I have a distributor account with Midway and Brownells. I will price check.

Agreed. I will be using a Noveske Barrell with an Armalite Bolt coated by WMD Guns in Nickel Boron.

Ok here is what I found out from Mega on their site. "Magazines… take your pick. Any SR25/DPMS compatible magazine such as Magpul, Knight, DPMS, CMMG, and C products. Bolts & Barrels Designed to accept any AR style .308 barrels and bolts*. This means you can use your AR10/Noveske or SR25/DPMS components. *We recommend using the same manufacture for your barrel and bolt. As always assembly should be done by a qualified gunsmith, using the proper head spacing gages."

Ok I am really confused now. Some have said that the Noveske Barell will fit the SI Defense or the MA-TEN. ALso if my lower says that it is compatible with DPMS why cant I use PMAGS with the Noveske Barrell and Armalite Bolt?

You had better believe it. I have a FZ coated upper, lower, bolt/bcg, and trigger. I was skeptical so I ran 1000 rounds of xm193 through w/o lube before I got tired and went home. It is simply amazing.

Stupid Noveske. Why did they choose AR10 when it seems the rest of the world is going towards DPMS. Any barrell suggestions other than Noveske? I love noveske Barrells though. Why aren't the PMAGS compatible with Armalite uppers? Ok Here are my wants. Nickel Boron coated Bolt, BCG, Upper and Lower Reciever, Trigger. PMAGS. High quality barrell like Noveske.

I am still deciding on a bolt. From reading others posts I am needing to get the MA-TEN if I am going to use the Noveske Barell. Any recommendations as to BCG and Bolt?

Any suggestions for Bolt and BCG? I will definitely send it to get NIB coated then.

LOWER Geissle DMR Trigger or RRA NM coated in Nickel Boron EBR V2/308 KNS Anti Roll Pins Hogue Overmold Grip SI Defense AR-308 Lower Parts Kit MAGPUL PRS Stock BADASS Ambi Safety Selector Troy AMBI Mag Release RECIEVER SI Defense Generation III .308/7.62 Billet Matched Set Fail Zero Coated or MA-TEN Nickel Boron coated from WMD Guns UPPER Titanium Firing Pin Troy BattleRail TRX-308 13.8″ or 12" Nickel Boron coated ambi charge handle for .308/7.62 18" 7.62mm Noveske Barrell Charging Handle PRI Combat Latch Upgrade SJC Titan Compensator, .308 720-002 OPTICS/MOUNTS GG and G Quick Detatch Heavy Duty XDS Bipod ACCU SHOT Monopod Precision Rail with Quick Knob Trijicon Accupoint 5-20x with Green Mildot Reticle Larue LT104 Scope Mount Cattail for Trijicon Accupoint MAGAZINES Magpul

I definitely want a Nickel Boron Coated bolt and BCG. Any suggestions? I want shot peened, MPI inspected high quality bolt.

I was actually looking at the SJC Titan for my brake. I want to go with an 18" Noveske Barrell. Do I have to use the MA-TEN with this barrell or can I use the SI Defense? It says that the Noveske is only for use with AR10 uppers, but the SI Defense is built with a DPMS height upper. What gives? I am definitely going with the factory installed low profile gas block.

I am planning a build soon. I was looking towards the SI Defense Billet Matched set coated in Nickel Boron. On the other hand I want to go with a Noveske Barell. Do I have to go with the MA-TEN to use the Noveske? If I do go with the Noveske I will just send the MA-Ten out and have it NIB Coated. As far as the bolt and BCG what do you all think?