moagm316

I have two XDMs that are absolutely beautiful, but I am wanting to switch it up a bit. Both are NIBX coated by WMD Guns. Both are for sale. You can either make me an offer or bid on them in my gunbroker auctions. I am also willing to trade them. I have them listed on Gunbroker Buy Now, but for members of the forum I will drop the GB price $50.00. 750.00 for the 4.5 650 for the 3.8 Here is the 3.8 WMD GUNS Nickel Boron coated slide, locking block, barrell, and slide release 4.8 Lb Powder River Precision Ultimate Carry Kit installed by Ten Ring Precision. PRP Stainless Steel Ejector installed Canyon Creek oversized extended magazine release installed(I have additional magazines available and ship free when you purchase the firearm for $20 each) 3 x 13 round magazines with Pearce finger extensions pre installed (I have additional magazines available without the finger extension and ship free when you purchase the firearm for $20 each) 1 x 19 round magazine All used magazines have new springs Ligtning strike shock buffer installed Trijicon RMR mount included and installed Advantage Tactical front Sight post Installed N82 Tactical IWB Holster included Factory carrying case, paperwork, and accessories included The firearm has less than 1000 rounds of Hornady Critical Defense / Critical Duty fired through it. GB Auction 343726684 Here is the 4.5 4.0 Lb Powder River Precision Ultimate Trigger kit installed by Ten Ring Precision Nickel Boron coated Slide, Barrel, Locking Block, and Powder River Precision Solid Stainless Steel Guide Rod Powder River Precision Stainless Steel Ejector Canyon Creek OVersized and Extended Magazine Release 4 Factory 19 round XDM Magazines with New Magazine Springs (More magazines are available upon request and ship with the firearm free $20.00 each) Pre installed RMR Mount for Trijicon RMR and advantage tactical front sight Strike Industries Shock Buffer Factory XDM carrying case and accessories included The firearm has 1500 rounds of match grade ammo through it Serpa with paddle and belt attachments included GB Auction 343433482

I think I see an EVIL high point in my future. Or a parts kit gun.

Some prefer a rear bag to the monopod, but i have found that it works equally as well as a rear bag. You can adjust elevation by utilizing it as a lever/twist adjustment knob. I will say though you should learn to shoot with both. The ACCUSHot monopod is the only one that I would go with.

I agree I have almost exclusively switched over from PMAGS. I love lancers mags they are slimmer lighter and fit where the PMAGS don't. I also like the added reliability of the steel feedlips. I was just thinking the same thing. I wish that they would make a AWM magazine with the SR25 profile like those for the DPMS .308. I am going to shoot Lancer an email asking just that.

I was looking into some of the 30cal cans so that I could run it for .300 BK also.

Most suppressors aren't warrantied shorter than 10 inches. A 300 bk upper is also in my future.

A smaller package when I put a suppressor on it.

SOLD Off List.

As a general rule I run the Yellow Trigger and Red Hammer for all of my setups. I find that it works excellently well.

I would also be willing to trade it for either some really good glass, a Krebs Custom AK74, or an SGL31 and a Saiga 12.

What people don't understand is the gunsmith over at Alamo Tactical is one of the gunsmiths at Hill Country Black Rifles. This is a 0.5 MOA or better gun. A far better shooter than I could probably get much tighter groups from it than that.

One sold. Will ship tomarrow. One more left.

Man everyone likes my setup but noone wants to take it home.

I love it. Especially with my 1-4 optic.

Price Drop alert. I have dropped my price to 25 each shipped.

I only purchase Mil buffer tubes as a rule.

I am wanting to fund another AR10 build so I am wanting to sell my competition AR and build a heavy metal setup. I shot the rifle for one season. The rifle was built by Alamo Tactical and the trigger work was done by Ten Ring precision. I have about 2600$ in the rifle I would like to get $1800 or more out of it. LOWER Rock River Arms NM 2 Stage Nickel Boron Coated by WMD Guns with a crisp 3.5lb trigger pull KNS Anti Roll Pins Hogue Rubber Grip Hogue Grip Core JP Reduced Power Spring Kit- Yellow Trigger / Red Hammer Spring Daniel Defense Lower Parts Kit Magpul PRS Stock SI Defense AR-15 Billet Lower Receiver Fail Zero Coated Troy Industries Ambi Mag Release Troy Industries Ambi Bolt Release MGSS AR-15/M16 PRS STOCK QD SLING ADAPTER Spikes tactical Billet Magazine Release Button BAD ASS Ambi Safety Selector with Extra Levers UPPER VTAC Extreme BattleRail - 13 inch with All rail sections included Fail Zero M-16 Bolt carrier Group SI Defense AR-15 Billet Charging Handle Fail Zero Coated SI Defense AR-15 Billet Upper Receiver Fail Zero Coated Noveske 16" Lightweight 5.56mm Stainless Barrel 1 in 7 Polygonal Ambi Charging Handle Upgrade Battle Comp 1.0 Polished Stainless VTAC QD Sling Swivel [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1140.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1138.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1133.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1128.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1127.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1124.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1123.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1119.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1120.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1116.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1115.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1112.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1111.jpg

I purchased this buffer tube and found out that I preferred the PRS on my competition AR. I put it on the gun and tried it out and just like the feel of the PRS on a competition rifle better. It is lightly used. I only shot 200 rounds through it. This is the style that has the older dead blow buffer inside it that helps reduce recoil. [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1101.jpg I am looking to get 60 shipped.

I have the bipod that I am willing to sell to you. It is an XDS with the quick release that I have lightly used.

I have 2 unused miad grips that I am wanting to sell. 25 each including shipping.

PICS ARE COMING I PROMISE

Because I have the MA-Ten upper I purchased a DPMS 12" TRX rail. I am trying to decide between the 18" or 20" armalite pattern Rainier arms barel. the 20" has a rifle length gas system and the other has the carbine length gas system. Will my hand guards cover the gas block on the 20"?

No trigger guard.

I have two new Miad grips for sale. 30$ 25$ each shipped. lower 48 only. I will accept Pay Pal. [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1105.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1106.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1107.jpg [img width=810 height=607]http://i1205.photobucket.com/albums/bb429/moagm316/For%20Sale%20or%20Trade/AR15/IMG_1108.jpg

I don't think so when it comes to the Steel mags, but I just wish that they would fix the Poly mags for use with other systems than the Ruger Gun Site.