308 DPMS High Getting Close

[mchljrdn]

Hello & thanks for reading.  I'm getting closer to completing my build.   I'd love some advice on the remaining (or missing) components.

On Hand or Purchased
Upper/Lower Receiver	Live Free Arms Set
Handguards	Brigand Arms AR10 Carbon Black 15
Barrel	.308 WIN, Bill Wilson Hunter, 17", 1-11.25 Twist
Butt Stocks	Battlelink Minimalist
Trigger	Larue MBT 2s
Any Advice is appreicated!
Lower Receiver Kit	M5 308 Enhanced
BCG	JP Low Mass
	Toolcraft BCG
Buffer Kit	https://www.aeroprecisionusa.com/m5-308-carbine-buffer-kit
Gas Block
Forward Assist
Dust Cover

[jtallen83]

Use the Armalite buffer kit and go with the Toolcraft BCG. Not sure on the LPK, is that what Live Free Armory recommends? 

[98Z5V]

7 hours ago, mchljrdn said:

 I'd love some advice on the remaining (or missing) components.

 

 

6 hours ago, jtallen83 said:

Use the Armalite buffer kit and go with the Toolcraft BCG. Not sure on the LPK, is that what Live Free Armory recommends? 

^^^  I had the exact same concerns that he did above ^^^.  ToolCraft BCG, Armalite AR-10 recoil system, complete, and call Live Free Armory about using that lower parts kit.  The Aero has longer pins, and there's something about my Live Free receiver set that I had to use a certain bolt catch.  I can't remember exactly what the issue was, but I ended up with the right one.  Live Free's pins were different, too...  I know I got one of them from someone here, and the other from someone here...