PSA Gen@ PA10 .308

[E5232]

Does anyone kmow what aftermarket bareels will fit the G2? the factory 20" piece overheats and is useless after a dozen rounds and im looking for a 20-24" bull

[shooterrex]

I used Balastic Advantage for my rebarrel. I wanted a shorter barrel though. 16". Any barrel designed for a DPMS pattern receiver will work.

[E5232]

17 minutes ago, shooterrex said:

I used Balastic Advantage for my rebarrel. I wanted a shorter barrel though. 16". Any barrel designed for a DPMS pattern receiver will work.

Thanks

[FOGeologist]

A suggestion on this: I have had two barrels on my AR-308, a 16" bull barrel from DPMS, which seemed capable of producing sub MOA groups with some ammo, and an 18" Faxon Big Gunner, which seems to be a little worse performing.

Use a shim, if your barrel's sloppy in the upper. Refer to the JP Rifles thermofit video on YouTube to see how it can be fitted.

Consider a heavy profile barrel; it will be like handling a tank turret, but if your goal is accuracy above all, then the thicker profile seems to prevent whip from wrecking your accuracy. I would also stick with 18" (preferably 20" +) to retain as much velocity as possible.

Get a numbered drill bit and identify the gas port diameter, if it doesn't match 98's list, drill it out.

[E5232]

1 hour ago, FOGeologist said:

A suggestion on this: I have had two barrels on my AR-308, a 16" bull barrel from DPMS, which seemed capable of producing sub MOA groups with some ammo, and an 18" Faxon Big Gunner, which seems to be a little worse performing.

Use a shim, if your barrel's sloppy in the upper. Refer to the JP Rifles thermofit video on YouTube to see how it can be fitted.

Consider a heavy profile barrel; it will be like handling a tank turret, but if your goal is accuracy above all, then the thicker profile seems to prevent whip from wrecking your accuracy. I would also stick with 18" (preferably 20" +) to retain as much velocity as possible.

Get a numbered drill bit and identify the gas port diameter, if it doesn't match 98's list, drill it out.

Thank You

 

[DNP]

4 hours ago, RandaPDoughty said:

The PSA Gen3 PA10 .308 is a great introduction to the AR-10 line-up, combining accuracy and reliability at a great price.

Very insightful. Thank you for your addition to this conversation.