LR-308 build

[Ironwolf34]

So this is my first ever build and so far just from pics and youtube the lower has been decently simple, other than the pivot pin detent lol  I cant find instruction on my trigger at all and help is appreciated. Thanks

[edgecrusher]

what do you have, or what is the end use, or is it that you are having trouble with trigger install? we need more to help. welcome to the forum by the way.

[Ironwolf34]

thanks for the welcome. Its dpms lower and the parts kit was dpms  basicly all i have left is the trigger hammber and disconnector and not sure which order to assemble.

[edgecrusher]

ok ready?you need to take the trigger, get in place with the tension on the spring, and place the disconnector in and get your trigger pin in to hold it in place. it will not be easy, any of this, so take your time. also if your parts kit came with a small vial of lube hit both pins. it may be easier to help you line these up by using a roll pin punch, i do, and it helps to keep everything aligned. next the hammer goes in, getting the tension on the spring and pushing into place, put hammer pin in and you're done. sounds easy. read this several times man then try. i promise you'll thank me if you have the punch's.

[Ironwolf34]

alrighty thanks  im gonna read a cpl times and try it out lol thanks again.

[Ironwolf34]

let me see if i can get this question to make sense.  on the hammer spring  do the prongs go under the trigger pin and get the tenstion from the lower its self or do the prongs go on top of the trigger pin?  that make sense?

[edgecrusher]

yes it does, on top. it's a bitch but it's sounds like your half way man  <thumbsup> this isn't easy for the first time. go for it

[edgecrusher]

i am handing this one off to the others, i have to hit the hey, night guy 7p-7a, i'll check when i wake to see how you made out <munch>

[Ironwolf34]

Success! with help from edgecrusher Thanks!

[NoFail]

That's great!!! Now pull out that sucker and get a real trigger  <lmao>

Oh man Ironwolf I'm sorry I can't resist. No but seriously go with that DPMS trigger for a little while and you should figure out that you may want an upgrade there. Yeah go with that one and when it comes time to get new much better one then when you do you will appreciate it soooo much, seriously bro. Sorry I meant no offense just having fun, and WELCOME Brother Ironwolf!!!!!  <thumbsup>