Dane Armory Posted April 24, 2013 Report Posted April 24, 2013 Well got another lower receiver almost put together, missing the pivot and takedown pins. This one is number #24, thinking of painting the barrel red or blue and the buffertube (lower receiver extension) the opposite color. Also will paint something yellow.
98Z5V Posted April 24, 2013 Report Posted April 24, 2013 I've got you covered on the pins, brother. Shoot me your address. <thumbsup>
Dane Armory Posted April 24, 2013 Author Report Posted April 24, 2013 I've got you covered on the pins, brother. Shoot me your address. <thumbsup>copy !
Dane Armory Posted April 25, 2013 Author Report Posted April 25, 2013 In the mail in the morning, brother! You are the man ! Thanks.
98Z5V Posted April 25, 2013 Report Posted April 25, 2013 They'll be extended pins - don't be offended... :))
Dane Armory Posted April 26, 2013 Author Report Posted April 26, 2013 They'll be extended pins - don't be offended... :)) With the kurled knobs ? If so great , I put a set of those in a lower for Lance last week.
Dane Armory Posted May 6, 2013 Author Report Posted May 6, 2013 Took the trigger group out of this loiwer and installed the RRA natiioinali match trigger of another gun today. I swapped the 24 inch dpms upper also. The quad rail is loose and I'll have to fix this next . Need glass may have to put a cheap scope on I have in the closet. I have FDE magpul moe grip and buttstock. It will be ready to shoot Wednesday !
98Z5V Posted May 8, 2013 Report Posted May 8, 2013 I brought pins for you last weekend - but brought .308 pins. I have a GRIP of pins with me now, so we'll swap in a set tomorrow at the range.
Dane Armory Posted May 9, 2013 Author Report Posted May 9, 2013 I cleaned the gun today, spring in the selector was kind of funny so I replaced it.. Did not do anything to the trigger , it is very light 2-3 pounds. Josh was shooting and had a problem so we hadthe gun cleared I held it in my left handby the quad rail with the ejection port facing up... He put 2 rounds in the mag and inserted it in the magwell...I pulled the charging handled back then let it go.. Both rounds fired. We put the gun away after that. The gun has very little recoil , fairly well balanced for a heavy gun. Trigger pull light. Maybe Tom or anyone else who shot it can comment.
Dane Armory Posted May 10, 2013 Author Report Posted May 10, 2013 Which one was this, brother? It had the fde grip and buttstock and the 24 inch SS bull barrel. Cheap black scope w/red ring.
Dane Armory Posted June 18, 2013 Author Report Posted June 18, 2013 I disasembled the lower over the weekend and found a large rifle primer in the trigger mechanism causing all the problems I was having. Next step on this gun is a new upper. I have a mini gun barrel blank that will need to be profiledand threads turned into it.
planeflyer21 Posted June 18, 2013 Report Posted June 18, 2013 Had that happen right after I'd read about it, primer in the trigger group! What bad luck...you'd better give me that minigun barrel so you don't have any problems. Jon
Dane Armory Posted June 22, 2013 Author Report Posted June 22, 2013 Worked on the mini gun barrel today, prepped the ends. Its 21 and 3/8 inch long. Not sure what kind of profile I will do but I am liking a heavy barrel they just shoot better.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now