BRD51 Posted October 4, 2013 Report Posted October 4, 2013 These are the only .308 powders I have on hand that are listed in my reloading manual for .308. Has anybody reloaded either with 165 or168 g bullets? If so, what load? I don't really like the 4320 because you have to compress it so much to get anywhere close to a hot load. What is your preferred powder for these bullets? I will be using a 18.5" FA barrel.
bubbasks Posted October 5, 2013 Report Posted October 5, 2013 My understanding is blc 2 is for the lighter projos 150 and below. I like 4895 for my 165s and up
N Jensen Posted October 5, 2013 Report Posted October 5, 2013 Looking at Hogden website BLC 2 would work fine with good FPS with the 175. Ball powder would measure very good as well. I would go to the max right off the bat, Start at 44.0 g and go from there. Good luck.
planeflyer21 Posted October 5, 2013 Report Posted October 5, 2013 I would go to the max right off the bat, Start at 44.0 g and go from there. Good luck. Maybe in YOUR rifle but that is a recipe for DISASTER in MY rifle.
BRD51 Posted October 7, 2013 Author Report Posted October 7, 2013 Thanks! I will try to find some 4895 to try.
bubbasks Posted October 7, 2013 Report Posted October 7, 2013 4895 is my fav. I run 43 with cci mags or 44 with std on the 168. 1gr less on the 175s. Hot but not too hot
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now