Jump to content
308AR.com Community
  • Visit Aero Precision
  • Visit Brownells
  • Visit EuroOptic
  • Visit Site
  • Visit Beachin Tactical
  • Visit Rainier Arms
  • Visit Ballistic Advantage
  • Visit Palmetto State Armory
  • Visit Cabelas
  • Visit Sportsmans Guide

SIG 552 laser modification


Recommended Posts

After I got my SIG522 I decided to remove that fake gas block (adjuster) that actually works on the SIG556 and replace it with a laser with remote switch.  Got the laser at Walmart for about 30 bucks or so, and I drilled and tapped the side holes 8-32 for set screws.  That kept the laser firm and mounted toward the top so that the elevation and windage screws would still be accessible and able to adjust it.  Does it work?  Raccoon on the porch with the laser dot between the eyes, as well as the possum near the side of the house (same condition at night) would attest to that... but they are not with us anymore.  Wherever the dot is, the bullet hits.









Link to comment
Share on other sites

Also, on the safety bar switch I drilled a small dimple and filled it with red paint, so that when the safe is on, that dimple is covered.  But when in the fire position, the red shows and you can physically feel the dimple even in total darkness.







Same thing on the opposite side.  The SIG522 has ambidextrous safety switch.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...