lower jig

[mrraley]

So I'm thinking about giving another shot at finishing a few lowers or three.

What jig is being recommended?

Any particular tools that make things go smoother?

[Ravenworks]

Every thing you need right here,use the jig they sell,it's one of the best on the market.

https://www.ceratac.com/default.asp

[suzukiray]

5D Tactical has the best jigs of all the jigs I've bought. And I have 6 or 7 different jigs now.

[CRracer912]

5D tactical jig pro. Stupid easy and idiot proof. I'm proof!?

[CRracer912]

And I'll second or third(if Lane was in here), Ceratac is AOK.

I've shown my ar308 kit I bought from Ceratac to several, all thought it was much more than it actually was. I haven't busted out scales yet, but it quite a bit lighter than my son's PSA.

[Ravenworks]

22 hours ago, suzukiray said:

5D Tactical has the best jigs of all the jigs I've bought. And I have 6 or 7 different jigs now.

I should have added that 5D is the jig they sell.

[panel77]

5d, but if you do a few-use your trashed mill and wrap a couple wraps of tape around the pins to rough it out and use up all the rough cutting on your ghetto bit,

 

then remove tape, swap your bit to the new/good one and SLOWLY finish it out to a flawless finish

router didnt have the depth of plunge so had to keep slipping the bit down in the tool

[lineman1954]

hey yall, so I'm thinking of building a hunting ar 308, my question, is there any place that rents these jigs, or any club where a guy can buy then sell a jig when finished to the next guy or gal ?l