Firing Pin Retaining Pin ?

[98Z5V]

1 minute ago, shooterrex said:

How does that work? I posted the link and you get a cut?

Been workin' with them for awhile - you just gave me the edge to put my "proof" in there.  You provided the "angle of the dangle" and I seized the opportunity...  

[98Z5V]

2 minutes ago, shooterrex said:

Sat down w/Dave last night and discussed what he needs to order for his 6ARC.

Let me know what he plans for a barrel and barrel length, and I'll provide the recommendation on the recoil system, based on that stuff.  

[shooterrex]

3 hours ago, 98Z5V said:

Let me know what he plans for a barrel and barrel length, and I'll provide the recommendation on the recoil system, based on that stuff.  

18" rifle length gas. A2 stock.

[mrmackc]

12 hours ago, 98Z5V said:

I hope they send me my cut, like they promised...  

 

12 hours ago, 98Z5V said:

I hope they send me my cut, like they promised...  

They said that I should send you your cut . Watch your mail!

[REARSPROCKET]

So the KAK pins came Sat. and they are .945 as well, so waiting on the RCA ones but they are probably the same length ? Why are these split tip solid pins all too long and the solid pins without the split in the end are shorter  ? Think I'll just add a 1.5x3 o-ring under the head side of the pin and "Just Send It".

Edited February 2, 2021 by REARSPROCKET

[98Z5V]

18 hours ago, shooterrex said:

18" rifle length gas. A2 stock.

Regular old AR15 Rifle Recoil System will be perfect in that gun.  

[shooterrex]

6 hours ago, 98Z5V said:

Regular old AR15 Rifle Recoil System will be perfect in that gun.  

Copy

[mrmackc]

On 1/30/2021 at 6:32 PM, shooterrex said:

KAK not KNS sorry

https://www.kakindustry.com/kak-bcg-firing-pin-retainer-308

 I just measured the KAK Lr308 BCG -firing pin retainer-308 that I ordered and here is the information:

Total pin length          0.943"

Pin diameter              0.121"

Pin head O.D.              0.245"

pin slot length           0.252"

This is the solid slotted firing pin retaining pin   $3.00 each <sales@kakindustry.com>