MaineMan2 Posted October 24, 2022 Report Share Posted October 24, 2022 Does anyone use a Flex Hone to polish the chamber on a new barrel or is that only for when you have problems? How about lapping the barrel during break in? Thanks, Chip Quote Link to comment Share on other sites More sharing options...
jtallen83 Posted October 24, 2022 Report Share Posted October 24, 2022 (edited) 41 minutes ago, MaineMan2 said: polish the chamber on a new barrel or is that only for when you have problems I've used a chamber mop and a real fine lapping compound on a tight chamber with good results, I really don't even look close unless there are problems with extraction or odd marks on brass. Never lapped a barrel. Edited October 24, 2022 by jtallen83 Quote Link to comment Share on other sites More sharing options...
shooterrex Posted October 24, 2022 Report Share Posted October 24, 2022 I have used JB bore paste on a few barrels to polish the bore. I don't mess with the chamber unless there is a problem. Quote Link to comment Share on other sites More sharing options...
MaineMan2 Posted October 24, 2022 Author Report Share Posted October 24, 2022 Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.