Magpul PRS

[Ironwolf34]

so im ready to buy a buffer tube.  I want to put the Magpul PRS buttstock on this beast so is there a certain buffer tube i need? and what are oppinions on a hydraulic buffer?  if i do go hydraulic does that just go in with a stander spring?

[MikedaddyH]

If the buttsock SAYS mil spec get a milspec buffer tube. If it SAYS commercial get a commercial buffer tube.

Cant help with the hydraulic buffer I dont use them.

[edgecrusher]

the prs uses a rifle length tube, i would go with a buffer from clint, really good stuff

http://www.heavybuffers.com/

[Guest LLArms]

If you have a DPMS LR-308 your stock components will work just fine. Basically anything that is a fixed stock is probably good. Adjustable (length) stock probably means carbine buffer.

[Ironwolf34]

talked to a guy at brownell's.com and he said that for the 308 im buying the a1 buffer tube (meaning its for a ar15) but im putting the different buffer and spring in to fit that PRS ? hope this is right cuz that what i ordered.

[Ironwolf34]

Not to fit the prs but the bigger spring and buffer for the 308

[imschur]

Yes an AR-15 tube with a 308 Rifle length spring and 308 rifle buffer.

[Ironwolf34]

k..... thanks. I was a little nervous about it