Tired of swaging military brass ?

[tucson308]

Then check this out on ebay and be sure to look at the reviews. No more long, tedious process of swaging brass. You can also contact me through this add for a 5% discount.

 

1. Dillon XL 650 Press Primer Pocket Swager Uni Former re Size 223 ...

   www.ebay.com/itm/Dillon-XL-650...-/221261273362?pt...‎

   •  

   $77.80

   Dillon XL 650 press, primer pocket swager, uni-former, re-size .223/.308 brass. in Sporting Goods, Hunting, Reloading Equipment | eBay.

    

 

[392heminut]

I've got a 550! :'( :tweed:

[tucson308]

550 is in the works as I get a lot of request for a 550 model as well as RCBS, Lee and Hornady. We are trying to make sure we keep up with the current demand, but will finish up the 550 model soon - 2 weeks ish.

[FiremanEd]

does your tool replace the priming system or does it have to be swapped out between swagging and loading? I'd asume a swap out but the pictures I saw aren't real clear.

Thanks.

[survivalshop]

This subject should be in the "for sale" category.

Edited August 3, 2013 by survivalshop

[seasprite]

Since I use my press for seating primers I haven't swag any of my crimp primer pockets and haven't had any issues with getting them seated other than the additional force needed to get by the crimp. All primers have gone bang when I pull the trigger and none have deformed or discharged when seating.  So you might give it try if your tired of swagging. 

[bubbasks]

I just use my reamer/debutring tool and give it a nice ramp for them to not get snagged on. One flick of the wrist and done. Works great

[survivalshop]

I also use the RCBS swaging tool & the method above for light crimps .