eagle10 Posted August 11, 2013 Report Posted August 11, 2013 Does anyone make flip open scope covers for a 56mm objective lens? I went to Butler Creek, but couldn't make heads or tails of their site over there, thanks for any help.
imschur Posted August 11, 2013 Report Posted August 11, 2013 I would think the #39 would work. Leupold also list 56mm in there Alumina line
BLKSHEEP Posted August 12, 2013 Report Posted August 12, 2013 Butler Creek- I wasn't sure of your eye piece size so I couldn't mark it.
eagle10 Posted August 12, 2013 Author Report Posted August 12, 2013 Thank you both!! How do I figure out the eyepiece size?? Get someone to mic it?
planeflyer21 Posted August 12, 2013 Report Posted August 12, 2013 Thank you both!! How do I figure out the eyepiece size?? Get someone to mic it? That's the most accurate way, as the guide is just a general suggestion. Unless the store will let you stand there with your scope and try the different ones on your scope.
eagle10 Posted August 12, 2013 Author Report Posted August 12, 2013 (edited) Ok so I borrowed a digital mic, a good one Brown/Sharpe, it is calibrated. I measured the front outside objective lens area and came up with 65MM or 2.559 inches and on the eyepiece I came up with 44MM or 1.7365 inches, does this sound right and if so, according to the Butler Creek chart I would need a #19 Eyepiece and a #61 Objective, does that sound right??? The scope is a new one from Nightforce it is the ATACR scope 5-25x56. Edited August 12, 2013 by eagle10
unforgiven Posted August 12, 2013 Report Posted August 12, 2013 I got butler creek for my scope they are rubber and strech a bit.On the objective lens I got it on but cover wouldn't stay shut so I had to drop down one size and it worked.My lens were smaller than you'r though.Maybe if you could get someone on the phone?? I had gone to Cabelas and was able to go back and change for the right size.I had trouble with the chart they have also.
unforgiven Posted August 12, 2013 Report Posted August 12, 2013 Wish I would have known about those,nice.
imschur Posted August 12, 2013 Report Posted August 12, 2013 I wish the premium scope manufacturers would thread the scopes like Leupold. The Alumina covers are awesome.
eagle10 Posted August 13, 2013 Author Report Posted August 13, 2013 Well the guy from Nightforce called me back and the OD measurements I took were dead on, so if I go with Butler Creek, then it would be #19 & # 51 respectively. I do like those "Alumina" ones, nice looking and will take a look at the above Weaver brand. Thanks for the suggestions and help.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now