Gas Block choices

[D.R.D.]

I'm trying to narrow it down and choose from these:

Wilson

http://shopwilsoncombat.com/Adjustable-Lo-Profile-Gas-Block-937-Mid-Length-Straight-Gas-Tube/productinfo/TR-AGBL-M/

PRI

http://www.precisionreflex.com/Detail.aspx?PROD=186815&CAT=4274

 

To fit under this:

MI (15")

http://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_ID=1209

 

with this barrel:

BHW

http://www.blackholeweaponry.com/catalog/product_info.php?cPath=48&products_id=100&osCsid=d6b1fcf3e612a4f68ff7bfe030ce5efd

 

Any suggestions or obvious issues?

 

Thanks

Edited October 8, 2013 by D.R.D.

[Rsquared]

I can comment on the gas block. I'd give the Wilson a try. I've used the PRI blocks in the past (still currently have some). They work fine as long as you don't mind modifying some brand of forearms if the adjustment screw doesn't line up. Granted, a couple hits with a dremel, and you can usually get the spot open you need opened up. Or, a more precise hole done with a drill press. I've tried both. They work, but as I move forward, I'll be using different blocks.....such as the Wilson you mentioned, or the Syrac (I kinda like them too after reading up on them). That's the only drawback with the lo-pro style.....access through the rail. But, anything can be resolved with a little brainpower, tinkering and BEER.  <thumbsup>   Not necessarily in that order.

[D.R.D.]

LOL - got it.  Thanks.  Too bad Syrac doesn't make one for bull barrels (.936")

 

DRD

[shibiwan]

Didn't I recommend the Wilson Combat one too? :D

[D.R.D.]

Yes, you did.  Thank you.  I wouldn't have known about that one if it weren't for you.  It's likely the one I'll go with.