Ksgunguy Posted March 16, 2014 Report Share Posted March 16, 2014 Hi all, so I finished my build and today was the first day I had a chance to shoot it. I only put 8 rounds down range before the rains came. Things I noticed was the first few shots the empty rounds did not eject. So I adjusted the adjustable gas block and the rounds went between the 2:00-4:00 o'clock direction. Some of the casing noted to be slightly bent ( not at the primer side of the case but the other side, the open side where the bullet is seated). I know I need to shot a lot more to get it broken in, but not sure what to expect. Afterwards I cleaned the barrel and dunked my BCG in mobile 1. I also had new magpul 20&10 round magazines so I just filled them up with ammo and hope to get those broken in as well. Suggestions ???. Or do I just keep on keepin on Quote Link to comment Share on other sites More sharing options...
washguy Posted March 16, 2014 Report Share Posted March 16, 2014 KS sounds like you got it going on....good job....keep on keepin on ....:) Wash Quote Link to comment Share on other sites More sharing options...
survivalshop Posted March 16, 2014 Report Share Posted March 16, 2014 Case mouth indentations happen on some rifles , depends on a couple of factors , some you have no control over & some you don't & may just go away with a higher round count. Just keep shooting & see how she goes . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.