awesymoto Posted January 12, 2011 Report Share Posted January 12, 2011 have a LRT 308 and searched around a bit, this is what i found? MOE no, MIAD yes for compatibility w/o Mods? Quote Link to comment Share on other sites More sharing options...
98Z5V Posted January 13, 2011 Report Share Posted January 13, 2011 Either will work just fine. Do the set screw mod to the rear takedown pin and spring, if your particular lower has it going in from the bottom of the receiver (like a DPMS does). Quote Link to comment Share on other sites More sharing options...
SARDUDE Posted January 21, 2011 Report Share Posted January 21, 2011 Either will work just fine. Do the set screw mod to the rear takedown pin and spring, if your particular lower has it going in from the bottom of the receiver (like a DPMS does). I am assuming this would involve tapping the hole, shortening spring, and putting in set screw?????? Quote Link to comment Share on other sites More sharing options...
98Z5V Posted January 23, 2011 Report Share Posted January 23, 2011 I am assuming this would involve tapping the hole, shortening spring, and putting in set screw??????Correct - super easy to do, and it doesn't affect the function afterwards. <thumbsup> Quote Link to comment Share on other sites More sharing options...
SARDUDE Posted January 24, 2011 Report Share Posted January 24, 2011 Thanks! <thumbsup>I assumed that was the process.I did something similar for an AR15 pistol build.Will look at doing so on my DPMS! Quote Link to comment Share on other sites More sharing options...
98Z5V Posted January 24, 2011 Report Share Posted January 24, 2011 Once you do that, you'll be able to run the MOE or MIAD without a problem. <thumbsup> Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.