Belt Fed

Hope i didn't screw up a tendon or something, either with the hammer or drill. i cant bend my thumb any. course it is swollen. also hope i didn't break anything with the hammer, it's pretty black and blue around the nail.

Finished the floor. Couldnt find any 3/4 plywood besides birch. Looks funny but itll have oil and mud and dirt on it soon enough.

Murderer

That ain't no lie, only reason he wouldn't let me bleed out is cause he needs another card

I bled quite a bit on her before i moved. didn't get a pic of the blood on her.lol she didn't even move. I thought a fine dog you are, you just gonna let me bleed out before barking or something.

Yep, you were the first one i thought about when i seen it pumping out. i thought i got to get this on video and pictures, after i took the pics i had done bled all over everything. even more so than in the pics. figured the video might be takin a chance.lol

Guess i should have took another pic of the piece of meat hangin out of the hole. but i was tired and ready to get another bandage back on. that torx bit was spinning full RPM when it went in.

I was going to try and take a video of the blood gushing out of the hole, but done bled out too much after the pics. figured i better get it stopped before passin out.

Put 8 mew piers down and leveled out the floor and ready to put the plywood down tomorrow.

It was an accident kinda day earlier i hit my knuckle with a small sledge hammer.

Was doing some remodeling and putting new piers under the shop floor. they were sagging a bit. while scewing a board in i jammed a torx bit almost through my thumb. bled like a stuck hog. bled all over the dog before i moved. lol she just layed there. anyway put a cloth rag and electrical tape on it and worked another 4 hours.

Don't even think about it.😡

Welcome to the site 308USK. Enjoy your time here.

Grease hardens over time, also in cold temps it hardens. Oil is better. don't throw that oil away.lol what i like about mobil 1 is don't get rank over time. some oil will and i have used some gun oils that smelled like crap. far as storing it. don't apply a ton of it to put it up. but when you go to the range crack it open and pull the BCG and apply it generously.

Had a guy at deer camp this past year with a jamming problem. he ask me what was wrong. i said is it oiled up good. he said i oiled it before the season. I took it apart and used some of the mobil 1 oil, he was using some fancy named stuff. i soaked the bolt really good. put it heavy on all the outer contact points. we took it up the the gravel pit and it never missed a lick. he said it was jamming every shot before.

what i have now is 10w 40, but what you have will work. Don't even shake, stick that drippin sucker back in there. They are not like an AR15, you can't over oil the thing. some of it may seep out the pins and between the halves. that you can wipe off.

Welcome to the site and thanks to men like you who served we are able to celebrate days like today.

Pics???

You can't over oil one.I put mobil 1 everywhere. in the BCG and every part of the BCG. i put it on heavy too.Oil inside the charging handle and outside.

OUCH, That's gonna be sore a couple days.

My dog ain't in this race even though i do have a g19. 😝

Oh boy, here we go again.