Cheek Riser Pardus Stock

[madmike26120]

I have a DPMS Sportical 308 ,Ive got the barrel worked out pretty good and the rifle is really accurate.I would like to get some sort of riser for a better cheekweld on the Pardus Telscoping stock.I really dont want to got o the exspense of a new stock.Any suggestions in how I could put on a cheek riser to get a better weld.Thanks

[blue109]

I've never seen one for that stock, but you could probably find a standard carbine stock pretty cheap used, and they make aftermarket risers for those. Just remember your charging handle is longer  and will probably interfere.

[unforgiven]

Low budget...get some closed cell insulation [ pipe wrap ] and put it on with duct tape.

[MikedaddyH]

It does exist ! Look harder !

[madmike26120]

MikedaddyH,the one you have pictured will fit the Pardus stock on the DPMS.Ive looked everywhere.What brand manufacterer is that .Thank you.

[MikedaddyH]

Three different manufacturer's.

[MikedaddyH]

Command arms $15

[MikedaddyH]

Tapco InterFuse $9

[MikedaddyH]

ATI strikeforce

Picture won't upload. It slips on and clicks in the slots.

[blue109]

Looks like the mounting slot will line up...but the pardus has that sling loop on top like an old car stock, and the cheek is a little different. Not a big investment either way. You can be our guinea pig :)

[madmike26120]

On 6/5/2016 at 11:33 AM, MikedaddyH said:

Command arms $15

 

[madmike26120]

THere are currently no risers made for the Pardus stock.