7.62x51/.308 load data 147gr

[lx2008]

hi,

i sure somewhere in here there is data for 147 gr. pulls. but there are so many pages to sift thru i was hoping someone can send me a link or share

some data for these bullets. powders i have for use are blc2, h335, imr 4895, reloader 15, varget & 8208xbr for this particular cartridge.

thank you for any help!

[MikedaddyH]

When I get a chance I will go out to the garage and take a couple of pictures from some manuals tonight.

[MikedaddyH]

No loads for 147gr in the two books I have handy. 

[MikedaddyH]

[MikedaddyH]

[MikedaddyH]

[MikedaddyH]

[MikedaddyH]

[Cunuckgaucho]

[MikedaddyH]

[MikedaddyH]

[MikedaddyH]

Use the 150gr data ... You should be good.

[98Z5V]

^^^   Yep, what he said.  

[lx2008]

thanks guys. i already have all the manuals. i just wanted to know if anyone had any specific data

using 147gr surplus bullet pulls. only 150gr in manuals. i knew i could probably start out slow using 150 data

i but i thought maybe someone in here might have used 147gr pulls and had their own data wrote down that they

could share.

[98Z5V]

18 hours ago, lx2008 said:

 i knew i could probably start out slow using 150 data, but i thought maybe someone in here might have used 147gr pulls and had their own data wrote down that they

could share.

You'll be that guy.    There's about zero discernible difference between a 147 and a 150, so there's no reason to start out slow.  Just run 150 data, straight up.

Let us know how it works out - report back on the load.  It helps everyone, at one time or another. 

[lx2008]

i sure will