Scott Clearman Posted March 9, 2023 Report Share Posted March 9, 2023 https://www.griffinarmament.com/griffin-ar10-stock-mounting-kit/ From what I read here it looks like the buffer weight is too light, but I also saw a thread showing the Griffin had it right so I wanted to check. This will be for a carbine build, 12.5 BA barrel with carbine gas, .308 caliber, and it will be suppressed 90% of the time at least. If not what correct options are out there? It looks like no parts from Armalite are available. Quote Link to comment Share on other sites More sharing options...
shooterrex Posted March 9, 2023 Report Share Posted March 9, 2023 From what I read the buffer tube is the same length as the Armalite set. That lets you use a H3 buffer and the springco red spring if their buffer and spring don't work. Quote Link to comment Share on other sites More sharing options...
Scott Clearman Posted March 13, 2023 Author Report Share Posted March 13, 2023 So has anybody tried this set? Or should I piece a recoil system together? Quote Link to comment Share on other sites More sharing options...
98Z5V Posted March 13, 2023 Report Share Posted March 13, 2023 That's the Griffin SOB buffer, and it's adjustable. That's a good kit, and not that much more than finding a genuine Armalite AR-10 Carbine kit. I'd say you could trust that kit that you have listed. I haven't tried one of those buffers yet, but I've always wanted to. Quote Link to comment Share on other sites More sharing options...
Scott Clearman Posted March 13, 2023 Author Report Share Posted March 13, 2023 OK, it's ordered. May be a bit before I get it all assembled, but I will let you know. Scott Quote Link to comment Share on other sites More sharing options...
98Z5V Posted March 13, 2023 Report Share Posted March 13, 2023 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.