RayGun19 Posted February 8, 2012 Report Share Posted February 8, 2012 Does anyone know of an add on rail that will fit the MOE hand guard, 2 or 10 o'clock position, that will put the accessory 90* to the ground? I have a Insight M6X, and to use the laser elevation and windage it needs to no be on a 45* angle.Might just be a stupid question as well. Quote Link to comment Share on other sites More sharing options...
Timing Posted February 9, 2012 Report Share Posted February 9, 2012 I would imagine once you zero the laser you shouldn't be making to many adjustments to it. Mount it 45 degrees and use trial and error until you are able to zero it properly.Eta: better yet, just mount your rifle in a vice, fire off ten shots and adjust the beam until it's in the middle of the group. Quote Link to comment Share on other sites More sharing options...
unforgiven Posted February 9, 2012 Report Share Posted February 9, 2012 Brother Ray got that 14.7 upper from PSA on order with MOE handguard in FOL was going to eventually put on light/laser combo.Was thinking of setting laser parrallel to bore [using laser round in chamber]so all that's needed is to know offset and not worry about zero at a specific distance.What do you guys think? <dontknow> Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.