30mm scope rings

[Jgun]

I'm in search of a set of 30mm scope rings to mount an optic with a 50mm objective lens, so I need around 1.1/8" height from rail top to scope center. The Badger high rings with 1.06" would work, as well as the NF high rings with 1.125"

[98Z5V]

Highly recomend these:

 

http://warnescopemounts.com/product/maxima-quick-detach-rings/

[EasyEJL]

Hmm did I screw up getting the high maxima instead of extra high? 50mm for me too

[unforgiven]

Nice rings. <thumbsup>

[EasyEJL]

Yep, I just tried them out. With a 50mm in the warne maxima you (and I) need the extra high model. Dangit

[98Z5V]

To determine scope centerline measurement, based on how Warne lists their rings (top of mounting base to bottom of where he scope will mount):

 

30mm scope is 15mm - 0.59055".

 

Add that to the measurement from Warne, on their rings, and it'll give you scope centerline, with that ring.

 

Warne Highs = 0.59055" + 0.525" listed ring height = 1.11555" scope centerline.

 

Warne Extra Highs = 0.59055" + 0.650" listed ring height = 1.24055" scope centerline.

 

Go higher, to account for scope covers, if it's close.

Edited April 25, 2013 by 98Z5V