Cali_Ed
-
Posts
1,713 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Gallery
Store
Everything posted by Cali_Ed
-
Hello guys are the harbor freight rock tumblers adequate? Running about 50 bucks
-
This should be pinned. His I what I did today for about an hour decap and resize the lot of free hornady match brass I got :)
-
Well I managed to score 440 pieces of hornady brass for free. And I also managed to jew the lc lr guy on his pricing. We will see how it turns out
-
Thanks for the info brother. I noticed al of the tips of the smks I loaded up weren't uniform piece to piece. Is that normal?
-
What are your guys go to primers, currently I just got a 100 pack to test out of the cci100 I haven't found some 210feds that I want to try
-
This essentially is what sits my primers once I bring the arm all the way back up. That piece of metal on the side of the ram
-
To put the primers in? I'm using the Lee press it self.
-
I ended up taking them out reemed the pocket and they fit a bit better. I'm going to try my hornady match cases but I want some fed 210 primers
-
Is this the proper way And with the flyer it measured 1.672 Also I had this happen with only my 7.62 fed cases so I didn't use them. Idk if you can tell but the primer is not uniform nvm I need to buy a primer pocket uniformer lol
-
Thank you brother I'll have to do that for the one on the first picture
-
Yes that's what I initially sighted in with. If that's the case once I find a load that provides a good group, I'd just adjust right?
-
Thanks for moving the thread! I warmed up with normal fed match 7.62 and the p.o.i seemed alot closer to the bullseye. Thoughts?
-
Poor people, I haven't seen anything about an ar style rifle. But I'm only going by what's people posted on social media. I hope nothing starts up.
-
100 yards, I'm not brave enough to joke about the distance hahah. With out a chronograph how do I go about analyzing what the diffrent charges are doing. Or is it as simple as which group was tighter at a given charge?
-
If it's a dpms pattern it's not called an ar10 brother. Fulton armory usually has the criterion barrels take a look on there website.
-
Howdy all each "group" was five shots except the first one since I got a dud Here's my my targets Not sure how to calculate moa tho
-
You were right brother, just had to get all the info. I don't have any lc brass yet
-
No idea lol
-
Is building your own an option? Opens up more wiggle room but it also opens up your wallet
-
So here's what I've gather so far using a little bit of math From the 6 mm br site Powder: rl15 primer: f210m minimum: 40.5g middle: 42.75g Max: 45g From alliant Powder:rl15 primer: Minimum:38.5g Middle:39.9g Max:41.3g Case:
-
So this is what I got from alliant. Hunting load 38.5 min 41.3 max Non conservative
-
I may have to shibiwan hahaha
-
That's alot of coin hahaha I'll probably get a couple hundred depending on lot sizes
-
Lmao got ya, guy has around 2k of it .30 a piece
-
Thanks again for the info brother, very much approcated. Any thoughts on lc lr brass? Worth buying?
