98Z5V

Accused of stealing 2.1 million in jewelry from an ex...

Only if it fell into the fire control group pocket, and jammed up the trigger somehow. Otherwise, it doesn't need to be in place to have a functional AR. It's only there to contain parts when you break the upper from the lower. The retainer shouldn't have come out, if the receiver extension was screwed in far enough to keep it in place - see if you can get some pics of the retainer hole in the lower, that shows the receiver extension end, in the lower receiver. Check your hammer spring, and make sure it's installed correctly - they can be installed backwards, and cause light primer strikes.

That's actually a good price!

@Rsquared, hey brother. I'm finally putting this one down. It's done now. Gone...

You bring your 30-06 out, and we'll see if this oldass M1903-A4 will outshoot it.

That lower came from a good friend, in trade for another lower...

Matty... @Matt.Cross.. Stack O' Grendels...

It's 30% larger than the AR15, and there is no "mil-spec" on it. Parts don't "line up" like an AR15, the springs are much stronger, and - there is no spec to follow. There's much more gas pressure in the 308 direct inpingement gas system... and manufacturers can't figure that out... If you want it to function, right out of the box, then...

My .45 is sexier than YOUR .45...

Receiver extension is GOOD. Run it, with zero modifications. Buffer LENGTH is good, but it's too light for a .308AR. You need the (commonly found) AR15 H3 buffer. You will need the Armalite EA1095 spring for that setup, and your recoil system will be as flawless as you can make it. Don't skimp on the spring - it's available all over, just look for it by name. Armalite EA1095 spring.

^^^ That's what he said right before he was arrested... ?

I'll finally bring mine out, next shoot. M1903A4. The reproduction 2.5x scope isn't on it, but there's a sweet fixed 4x Weaver K4 on there. It shoots so soft, you won't believe it.

I am the punishment of God. Had you not committed great sins, God would have not sent a punishment like me upon you. Genghis Khan. It IS on, my brother... ?

money shot...

We're here for you, throughout the process, make no mistake. Us AZ guys are Thick as Thieves, here... Don't go drilling into something expensive, right off the bat, man. Drill cheap things, and figure it out...

The truth comes out...

YES!!!

Shady, man. Just Shady...

SPILL IT, BROTHER!!! You're engaging in some nefarious shiit, in order to get a leg up on your brothers. You're sneakin'... That's like one of us going to some paid-for Sniper School, but just not mentioning it before the fall shoot....

I nailed that We The People holster, brother, with the $10-off Dan Bongino discount. $24 and freeeeee shipping, with that code, complete. I'll give you an appendix review once it gets here. Fuckin' awesome.

Prove it and say something... If you'da found it already, you'da said something....

@sketch Don't waste it, spit it in my mouth!!!

Drill and tap might be your only solution, man.

I'll test it - and see if their +0.75" zero works, that's for sure. I have the range to tell them if they're wrong on that one... If not, there's plenty of other guns it can go on. Oh, I almost forgot... you were directly referenced in another thread, but I didn't quote you... I wanted you to find it... Kinda like "talking behind your back..." You'll find it, I'm sure...

http://www.primaryarms.com/pa-1-6x24mm-gen-iii-sfp-rifle-scope-acss-griffin-mil-reticle-black ^^^ Just pulled that thing for it, and a "new" trigger to test out. Have never, ever seen anyone talk about this trigger, so I chanced it, and got it. I'll let y'all know about it as soon as it comes in next week. Might be a real winner, if it lives up to its hype, when we're short on the $99 LaRue triggers, and can't get them. This thing was $113. Then again, it might suck. I'll keep you posted, soon.