Jump to content
308AR.com Community
  • Visit Aero Precision
  • Visit Brownells
  • Visit EuroOptic
  • Visit Site
  • Visit Beachin Tactical
  • Visit Rainier Arms
  • Visit Ballistic Advantage
  • Visit Palmetto State Armory
  • Visit Cabelas
  • Visit Sportsmans Guide

DPMS LR-308 w/Burris QD PEPR and Bushnell 600 DOA Scope w/BDC


Recommended Posts

DPMS LR-308 with A3 Flat-Top. A2 Stock.. DPMS FF Tube w/vents.

Hogue Pistol Grip, MBUS Rear, Midwest Ind Front Flip. MagPul Mags.

DPMS Miculek Brake, Burris PEPR Quick Detach Model    8)

Bushnell 4-12x40 Trophy XLT with 600 DOA (BDC) reticle & AO feature..

(I had the scope and the BDC does work with HOT ammo 2850+ FPS)..

The scope lens cap is just about RIDING the MBUS but the MBUS still has movement so it can't be that tight on it.  <thumbsup>

Using an almost KISS approach.. and my wallet thanks me..

post-419-136297266061_thumb.jpg

Link to comment
Share on other sites

Thanks running under $1600 on a 308 is usually a good idea to-boot.

Got about 200 rounds on the scope from my S308 using it prior to this being put onto here..

checked @ 200 yards using the TAP and AMAX using ballistics charts and such... ranged @ 200 and shot right on point at 300 400 & 500 yard marks (at the 200 yard range)..

Link to comment
Share on other sites

I'll say this for the PEPR scope mount - my 16" 5.56 gun won't fit in it's case with the scope on there, so I detach it everytime I pack up to go home.  I remount it when I take it back out to the range, and it's still dead on.  Next time I take it out again, I'll make a shoot for group size and see what I get - I'll report back in here with target pics.  It's easily been on and off about a dozen times since I initially sighted it in.  Next range trip I'll test it out for accuracy again and see what I come up with.

Last time I had it out, it was still dead on versus the 300 meter steel silhouette.  <thumbsup>

Link to comment
Share on other sites

Nice lookin shooter....is that like the AP4 upper?? I'd like to get a short 308 upper to go with my LR 6.5. Yours looks like what I'm after........got a couple of those Burris mounts..really like em, clean lines, simple, strong mount. Haven't tried the on-off test yet but I bet they'd be awful close zero...

Link to comment
Share on other sites

It was called an A3 upper when I bought it..

it has a LOW PROFILE gas block.. and the HG can be removed without taking the gasblock off if I had to.. its lower than the HG front sleeve..

rifleapart.jpg

going to run some more rounds thru this weekend..  8)

I ended up putting a new Nikon ProStaff 3-9x40 and taking off the Bushnell.

shot this @ 200 yards last weekend.. 1 5/8" for 10 shots..

200ydPic2.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...